DIY TRIPLE PUMPS on the quick and cheap
#82
here's the rest of the job
avk threaded inserts may be a newb move so please excuse the butchery
Oakley Sunglasses
avk threaded inserts may be a newb move so please excuse the butchery
Oakley Sunglasses
#84
UNDER PRESSURE MOD
iTrader: (19)
So MM, you fed into the passenger rear, crossed over in the front, then out the back of the driver's side rail and into the regulator, is that correct? I've read some people like to split with a 'y' in the engine bay, then into the back of each rail, then back together at the front and into the regulator.
So which way is the correct way?
So which way is the correct way?
#86
Awesome write up this is my next on the list.Now my ls1 cam , T trim approx 8 pound on e85 would I be able to use the standard 3/8 fitting coming of the top of the fuel pump assembly then use -8 line to the reg then use feed as return.Would this be fine with running x2 GSS340.? Or should I use a y block with dash 8 bulkhead fitting as mightymouse did his? Oh it should make around 500-550 rwhp.Cheers
#89
Staging Lane
Join Date: Sep 2013
Location: Palm Beach FL
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Great setup i use Hobbs pressure switch when boost kicks in it turns the third pump. I was having issues getting tank lid to seal and dealing with fumes for few days before got that sorted
#93
Whats the website for that 3 way alum manifold? google'd it and didn't see it anywhere.
well just pulled the trigger on some parts. going to start mine soon here.
Also doing the 3 pump's with a -10 setup all going into a 99 stock tank. Will not cut the sides at all, will prob just drill another hole or two in the bottom.
Part #'s for anyone doing this:
Jeg's -10 fuel filter: 555-150006 $79.99
Anodized Straight -10AN Female to 1/2" NPT Male Swivel Coupler : 555-100338 $9.99
-10AN Black Bulkhead Nut: 555-110294 $2.99
-10AN Black Flare Bulkhead 90° Fitting: 555-110264 $14.99
-Walbro GSS340 $74.99 (Pump only, better off getting one with the filter and wiring harness :/)
- McMaster Carr - Three-way aluminium manifold for air. 1/2" 5465K73 $9.14
- McMaster Carr - 10 pack 5/16" barb fittings 5346K16 $12.86 (they sell them in singles, but they were like $2 each i think and will end up giving some to a friend or two.)
Ordered everything but the Mcmaster Carr stuff right off Amazon.
Already have a racetronix pump setup, so that's 1 pump. A buddy gave me a brand new gss340, so I only needed to order 1.
Still need to order line and a regulator
I will prob use a Aeromotive 13110 Pro-Series EFI Regulator
That is the only one that I really found that a lot of LS1's guys are using and also has a -10 inlet.
Brian
Also doing the 3 pump's with a -10 setup all going into a 99 stock tank. Will not cut the sides at all, will prob just drill another hole or two in the bottom.
Part #'s for anyone doing this:
Jeg's -10 fuel filter: 555-150006 $79.99
Anodized Straight -10AN Female to 1/2" NPT Male Swivel Coupler : 555-100338 $9.99
-10AN Black Bulkhead Nut: 555-110294 $2.99
-10AN Black Flare Bulkhead 90° Fitting: 555-110264 $14.99
-Walbro GSS340 $74.99 (Pump only, better off getting one with the filter and wiring harness :/)
- McMaster Carr - Three-way aluminium manifold for air. 1/2" 5465K73 $9.14
- McMaster Carr - 10 pack 5/16" barb fittings 5346K16 $12.86 (they sell them in singles, but they were like $2 each i think and will end up giving some to a friend or two.)
Ordered everything but the Mcmaster Carr stuff right off Amazon.
Already have a racetronix pump setup, so that's 1 pump. A buddy gave me a brand new gss340, so I only needed to order 1.
Still need to order line and a regulator
I will prob use a Aeromotive 13110 Pro-Series EFI Regulator
That is the only one that I really found that a lot of LS1's guys are using and also has a -10 inlet.
Brian
#96
11 Second Club
iTrader: (24)
Join Date: Nov 2003
Location: Chitown, IL
Posts: 721
Likes: 0
Received 0 Likes
on
0 Posts
#100
TECH Regular
If you're going to cut open the bucket then why bother trying to put them in there anyway. My second pump on the GTO was just clamped to the side. One will fit in the bucket like oem and the other can go anywhere.