Billiumss

iTrader: (11)

Hello all!

I need to buy some new injectors for my new turbo kit I'm installing in my 2001 Camaro SS M6.

I have a LS3 in the car now along with the LS3 intake and LS3 fuel rail.

I'm looking for an 80lb (ish) size injector @ 58 PSI.

What companies have the proper data to use in HP Tuners that are "affordable"? $1,300-1,500 for a set is not an option.

It seems like it's very hard to get the proper injector data from any of the vendors/sponsors, most just say for example " they flow at 60lb @ 43 PSI of fuel pressure", rescale for 58 PSI and your good to go. Sure, most people just scale and go, but why not do it right from the beginning?

If anyone can point me in the right direction, I'd appreciate it!

Thanks!

dr_whigham

iTrader: (49)

For your budget I'd say FIC's (Connection, not Clinic)
Then again as old as this is you've already bought something probably.

eaglegoat

Ever just considered waiting a few more paychecks?

gagliano7

Deatschwerks has what you want and they have the data on there website.

dr_whigham

iTrader: (49)

I kinda agree... for a FI build you really don't want to skimp on the fuel system. I'm guessing you're probably referring to Injector Dynamics, which imho, are the pinnacle of fuel injectors.

Billiumss

iTrader: (11)

Didn't buy anything yet, not ready to install my kit for awhile.

I've made plenty of other injectors "work" over the years, I just wish companies that sold them had better data than just 3 or 4 bar. HP Tuners has been out since 2004, would have thought by now the injector companies would have caught up to what people really need.

gagliano7

Deatschwerks injectors has all the proper data for hptuners. Copy and paste.

http://www.deatschwerks.com/gm-calibration-data

Billiumss

iTrader: (11)

Back from the dead...

Plans have slightly changed but still using LS3 top end on Forged LS2 short block.

Any other companies out there have tuning data in HP Tuner format that are reasonably priced?

I need to get some within the next few weeks...