Moser Prices at Brute Speed - Includes Shipping!
#61
![Thumbs up](https://ls1tech.com/forums/images/icons/icon14.gif)
Yes, the new crossmember can be purchased separately. Thanks. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
![](https://ls1tech.com/forums/signaturepics/sigpic168855_1.gif)
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
![](https://ls1tech.com/forums/signaturepics/sigpic168855_1.gif)
#62
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
![](http://www.exoticperformanceplus.com//images/projectCarImages/M%20McCullough%209%20inch%20rear%201.jpg)
![](http://www.exoticperformanceplus.com//images/projectCarImages/M%20McCullough%209%20inch%20rear%202.jpg)
![](http://www.exoticperformanceplus.com//images/projectCarImages/M%20McCullough%20%209nch%20rear%20picture%201.jpg)
![](http://www.exoticperformanceplus.com//images/projectCarImages/M%20McCullough%20%209nch%20rear%20picture%202.jpg)
![](http://www.exoticperformanceplus.com//images/projectCarImages/Mike%20McCulloughs%20new%20round%20of%20modifications%202.jpg)
This particular T/A received a Moser 9 inch with a spool. Unless you do extensive city driving, a spool is not bad at all in my opinion. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
![](https://ls1tech.com/forums/signaturepics/sigpic168855_1.gif)
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
![](https://ls1tech.com/forums/signaturepics/sigpic168855_1.gif)
#63
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
thanks Bob for the pictures,I will contact you shortly .that whats I am consider a spool with a Alum center section.I have a spohn torque arm and would like to adapt it to a moser 9"rear end.
Last edited by garygnu; 06-05-2010 at 10:05 PM. Reason: more infor
#64
![Thumbs up](https://ls1tech.com/forums/images/icons/icon14.gif)
You're welcome! I think that is a very good way to go. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
![](https://ls1tech.com/forums/signaturepics/sigpic168855_1.gif)
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
![](https://ls1tech.com/forums/signaturepics/sigpic168855_1.gif)
#65
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Hi Hussam, I tried to send you a pm and your box is full.
![Cry](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_cry.gif)
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
![](https://ls1tech.com/forums/signaturepics/sigpic168855_1.gif)
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
![](https://ls1tech.com/forums/signaturepics/sigpic168855_1.gif)
#66
![Thumbs up](https://ls1tech.com/forums/images/icons/icon14.gif)
Buy a Moser 12 bolt, Moser 9 inch or Moser M9 (fabricated rear) and it will ship just two days later. No other manufacturer that I know of can come close to this time frame! Bob
![](http://shop.brutespeed.com/media/M9%20with%20torque%20arm.jpg)
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
![](https://ls1tech.com/forums/signaturepics/sigpic168855_1.gif)
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
![](https://ls1tech.com/forums/signaturepics/sigpic168855_1.gif)
#67
TECH Enthusiast
iTrader: (8)
Join Date: Mar 2005
Location: Phoenix AZ
Posts: 686
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Bob, can the stock LT1 rear brakes be used with a stamped Moser 9" running 35 spline axles?
And would you give any discount for buying a housing/axle package and not putting it on a credit card?
And would you give any discount for buying a housing/axle package and not putting it on a credit card?
#70
![Thumbs up](https://ls1tech.com/forums/images/icons/icon14.gif)
![](http://www.moserengineering.com/skin/frontend/default/moser/images/media/about_banner.jpg)
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
![](https://ls1tech.com/forums/signaturepics/sigpic168855_1.gif)
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
![](https://ls1tech.com/forums/signaturepics/sigpic168855_1.gif)
#71
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thanks, I appreciate it! Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
![](https://ls1tech.com/forums/signaturepics/sigpic168855_1.gif)
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
![](https://ls1tech.com/forums/signaturepics/sigpic168855_1.gif)
#72
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
It all depends on how much horsepower your car has, but for the average 400 to 500 rwhp Camaro or Firebird, the Moser 9 inch with the Trac-Loc will do the job. If you still have the stock torque arm, then the lightweight Moser M9 should be considered too, as it comes with a chromoly torque arm and transmission crossmember.
http://shop.brutespeed.com/Moser-M9-...y-Complete.htm
I prefer the nine inch over the 12 bolt, and the link here explains why.
https://www.brutespeed.com/rear_end_information.htm Thanks. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
![](https://ls1tech.com/forums/signaturepics/sigpic168855_1.gif)
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
![](https://ls1tech.com/forums/signaturepics/sigpic168855_1.gif)
#73
![Thumbs up](https://ls1tech.com/forums/images/icons/icon14.gif)
Free Shipping on Moser Rear Ends at Brute Speed!
![](http://74.63.43.90/moser/wp-content/uploads/2009/08/spline_slide.jpg)
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
![](https://ls1tech.com/forums/signaturepics/sigpic168855_1.gif)
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
![](https://ls1tech.com/forums/signaturepics/sigpic168855_1.gif)
#74
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
http://shop.brutespeed.com/Moser-M9-...using-Axle.htm
Moser M9 Housing/Axle Package
http://shop.brutespeed.com/Moser-M9-...y-Complete.htm
Moser M9 Complete Rear End
Note that these rears ship out just two days after the order is received.
Bob
Moser M9 Housing/Axle Package
http://shop.brutespeed.com/Moser-M9-...y-Complete.htm
Moser M9 Complete Rear End
Note that these rears ship out just two days after the order is received.
Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
![](https://ls1tech.com/forums/signaturepics/sigpic168855_1.gif)
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
![](https://ls1tech.com/forums/signaturepics/sigpic168855_1.gif)
#76
Staging Lane
Join Date: Jan 2004
Location: Virginia Beach
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
So, is the wavetrac worth the extra money? I don't do any road racing, and I feel that is the place where that would really shine. MY car is daily driven at the moment, but will soon be a weekend car. I currently have a 12 bolt, but it whines, and needs a new differential. I've been reading up, and considering going to a 9 inch. I've got about 500 WHP now, but will continue to upgrade and hopefully have at least 600 in the next year or so.
The M9 package seems like the way to go, just wondering about the differential choice.
The M9 package seems like the way to go, just wondering about the differential choice.
#77
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thanks, I appreciate it! Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
![](https://ls1tech.com/forums/signaturepics/sigpic168855_1.gif)
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
![](https://ls1tech.com/forums/signaturepics/sigpic168855_1.gif)
#78
![Thumbs up](https://ls1tech.com/forums/images/icons/icon14.gif)
So, is the wavetrac worth the extra money? I don't do any road racing, and I feel that is the place where that would really shine. MY car is daily driven at the moment, but will soon be a weekend car. I currently have a 12 bolt, but it whines, and needs a new differential. I've been reading up, and considering going to a 9 inch. I've got about 500 WHP now, but will continue to upgrade and hopefully have at least 600 in the next year or so.
The M9 package seems like the way to go, just wondering about the differential choice.
The M9 package seems like the way to go, just wondering about the differential choice.
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
![](https://ls1tech.com/forums/signaturepics/sigpic168855_1.gif)
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
![](https://ls1tech.com/forums/signaturepics/sigpic168855_1.gif)
#80
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Check out my installation info at this link.
https://www.brutespeed.com/moser_ins...structions.htm Thanks. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
![](https://ls1tech.com/forums/signaturepics/sigpic168855_1.gif)
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
![](https://ls1tech.com/forums/signaturepics/sigpic168855_1.gif)