Biggsw784

iTrader: (9)

been looking around but not sure where to a good quality-built hosing. wanting some options from you guys out here that have dealt with this already. i am need 2 housings narrowed 3 inches on on both sides. thanks for any help

Casey Biggs
KPEracing.com

1993 z28 f1

iTrader: (6)

Hey:

Get it from MWC or Strange. both great to deal with.

Dub

Carl at CRP

iTrader: (9)

Strange doesen't offer the 9" for an F-Body.
Carl

Zmg00camaross

iTrader: (11)

Stange will built a 12 bolt I think and the S60. I have a MWC rear and love it and great guys to deal with and recommend you give them a call. There are several Sponsors on this site. Get in contact with Bob at brute speed also.

Carl at CRP

iTrader: (9)

Yes Strange has the 12-bolt or the S60 for the F-body.
I have spoke with Eric at MWC a couple of times, He is very pleasant and knowledgable, the thing that got Me the most was the conversations were about 8 years apart and He remembered Me!
Carl

MidwestChassis

iTrader: (5)

Not going to lie Eric has a mind that remembers everything.

Give me a call and we can discuss the Strange S60 or you can buy one of our housing's in many different packages. Having one narrowed is not an issue for us to do at all since we build our own housings in house. You can have the S60 narrowed as well, only down fall to the S60 is it does not come with a torque arm and cross member like our housing does.

Biggsw784

iTrader: (9)

i am from north texas and wolfe has already built the torque arm for a 9 inch so thats kind of what i am set on. this is my first f body build so not sure what the difference is in the torque arm. also i already have all kinds of 9 inch parts like gears and cases from previous builds. could out our shop. we built the duramax in Mike Woods Mustang. we are mainly a performance engine building shop but i am building a 2002 Trans Am as a shop car some-what. thanks again for any help. check out kperacing.com and also on facebook.

MidwestChassis

iTrader: (5)

We build a fabricated nine inch in house. Our housing comes set up for our torque arm and cross member set up. We do also bare core Fabricated nine inch housing also.

xXxSilveradoxXx

iTrader: (5)

MWC all the way, whether you're getting a 9" or an S60!

Bob@BruteSpeed

iTrader: (16)

http://shop.brutespeed.com/Moser-9-I...-and-Axles.htm

If you are looking for just a nine inch housing with axles, so that you can use your own center section, take a look at the above link. My price includes shipping and I doubt you'll find a lower price, plus it ships out just two days after you place your order.


http://shop.brutespeed.com/Moser-M9-...using-Axle.htm

Want the same thing but in a fabricated lightweight housing? Check out the above link. Bob

MidwestChassis

iTrader: (5)

We can sell just the housing, torque arm, and cross member. Or we can put you into a housing an axle package. We have many different levels we can start you at if you are wanting to put together your own components. Our housing and torque arm are exclusive to each other but offer no fitment issues and are not big bulky brackets.

Bob@BruteSpeed

iTrader: (16)

The Moser M9 housing, axle and chrome-moly torque arm package has one of the most streamlined torque arm mounting assemblies you will find. The torque am follows the contours of the F body floor, allowing it to work great on lowered cars. The torque arm bracket isn't "bulky" on the Moser M9 like it is on the standard Moser 9 inch. Bob

MidwestChassis

iTrader: (5)

Our true bolt in fabricated nine inch rearend housing features components such as a drain plug, 4 hole relocator style lca brackets, stock style anti-sway bar mounts, brake line clips, hose mounts and e-brake cable brackets(98-02) all as standard equipment at no extra charge.

Bob@BruteSpeed

iTrader: (16)

The Moser M9 housings are made from 1/8" thick laser cut mild steel, which is fabricated from one Triangulated piece of metal and combined with a 3/8" thick face plate. The M9 comes standard with internal gussets and bulk heads. It comes standard with a large fill plug and a drain plug. LCA brackets are a no charge option. Sway bar mounts are an option, but brake line clips, hose mounts and e-brake cable brackets are not available. However, Moser ships these rears out just two days after the order is placed, not two to three months like some other places... Bob

ssvert99

iTrader: (26)

we have some housings/torque arms in stock and can ship them same day, even powdercoated. no faster service in the industry. due to the fact we custom build our rearend packages and can ship them to the customer completely assembled there can be a short wait time because of their popularity. shipping times vary depending on the time of the year and in alot of cases parts availability from our vendors on some popular items.