9inch On It's Way
Thread Starter
TECH Fanatic
iTrader: (4)
Joined: Apr 2005
Posts: 1,010
Likes: 1
From: West Bloomfield MI
9inch On It's Way well my 10 bolt timebomb blew once last fall and i didn't have the money at the time for a 9inch, so i just bought the 3.73 gears and install kit and took it to Scott@Driveline-Solutions for the install...well about a week and some change ago, the rear end started acting up again....now that i have the money in hand...im not even gonna mess with it again. took the 10 bolt to scott to have him look it over and just get it in shape to sell it, and put down a deposit on a beautiful new 9inch that he's gonna build up for me! Also a new Driveshaft to go along with it. I want my car to be bullet proof. i can't wait...i'll post some pics in a week or 2 when i get it in!
going with 3.89 gears...should be fun with the plans for next year!
So thanks in advance Scott for a new Rear End!
going with 3.89 gears...should be fun with the plans for next year!
So thanks in advance Scott for a new Rear End!
W00000t!
__________________
Featuring 6 different turbo kits for your F-body!
Check us out on Facebook at: www.facebook.com/HuronSpeed
Featuring 6 different turbo kits for your F-body!
Check us out on Facebook at: www.facebook.com/HuronSpeed
Thread Starter
TECH Fanatic
iTrader: (4)
Joined: Apr 2005
Posts: 1,010
Likes: 1
From: West Bloomfield MI
no abs (since i have a 3 channel, abs, but no traction control)...direct bolt in other than that though. Gotta give up some good for some even better..i'll take a 9inch over ABS anyday! 
I did the same thing you did except the first time my 10 bolt started acting up i ordered the new 9 inch from scott. Wait until you see this thing its bomb proof man. Your gonna love the new set-up.
11 Second Club
Joined: Mar 2005
Posts: 165
Likes: 0
From: Tallahassee,FL
GOOD STUFF MAN--you're gonna love it. i just got done installing my stange 60 and i feel so much more confident that i have a strong peice of equiptment back there. unfortunately for me, i busted my 10 bolt, 3 different times and never had the $$ to throw down on a built rear--i still didn't so i charged it, but there is no way i'm going to the track and not launching at 6k. my old 10 bolts let me get away with it only a few times before having me call a tow vehicle.
keep us posted on your experience with the 9", driveshaft and the people you are purchasing it from. You're gonna luv it.
keep us posted on your experience with the 9", driveshaft and the people you are purchasing it from. You're gonna luv it.
Thread Starter
TECH Fanatic
iTrader: (4)
Joined: Apr 2005
Posts: 1,010
Likes: 1
From: West Bloomfield MI
yeah i know im gonna love it...no more launching at high RPMs and crossing my fingers and holding my breath and hope to hell it get's home HAHAHA.....i'll definatly update when i get it in and drive it around some....
yeah like i said last fall i didn't have the cash in hand to do the 9inch because of numerous other problems i had fixed last fall...
I know scott has done his fair share of 9inch builds and he's local for me, so it's a pretty good deal.
maybe scott will chime in with all the details of the build but i know he's busy as hell right now...took me about a week to even get ahold of him
yeah like i said last fall i didn't have the cash in hand to do the 9inch because of numerous other problems i had fixed last fall...
I know scott has done his fair share of 9inch builds and he's local for me, so it's a pretty good deal.
maybe scott will chime in with all the details of the build
but i know he's busy as hell right now...took me about a week to even get ahold of him Trending Topics
Originally Posted by SS4Matt
well my 10 bolt timebomb blew once last fall and i didn't have the money at the time for a 9inch, so i just bought the 3.73 gears and install kit and took it to Scott@Driveline-Solutions for the install...well about a week and some change ago, the rear end started acting up again....now that i have the money in hand...im not even gonna mess with it again. took the 10 bolt to scott to have him look it over and just get it in shape to sell it, and put down a deposit on a beautiful new 9inch that he's gonna build up for me! Also a new Driveshaft to go along with it. I want my car to be bullet proof. i can't wait...i'll post some pics in a week or 2 when i get it in!
going with 3.89 gears...should be fun with the plans for next year!
So thanks in advance Scott for a new Rear End!
going with 3.89 gears...should be fun with the plans for next year!
So thanks in advance Scott for a new Rear End!
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
Joined: Mar 2005
Posts: 1,599
Likes: 0
From: 32639 Groesbeck HWY. Fraser MI 48026
Matt, I have your center section built and the rest is on order from Moser. I will let you know when the rest arrives. I'll try to post up some pics tomorrow so you have something to drool over. 
Thread Starter
TECH Fanatic
iTrader: (4)
Joined: Apr 2005
Posts: 1,010
Likes: 1
From: West Bloomfield MI
burnzilla
Quote:
Originally Posted by SS4Matt
well my 10 bolt timebomb blew !
Join the club kid.
Quote:
Originally Posted by SS4Matt
well my 10 bolt timebomb blew !
Join the club kid.
Scott@DrivelineSolutions Matt, I have your center section built and the rest is on order from Moser. I will let you know when the rest arrives. I'll try to post up some pics tomorrow so you have something to drool over.
it was funny, when i pulled it apart again, the guy that lives down the street from me (works for Ford, and has a nice old mustang) we're always giving eachother **** for the whole ford vs GM stuff...and when the rear end blew, he was like "so gonna do the sensable thing and throw some ford parts back there?" i laughed and he gave me a Strange catalog....i just gave the catalog back to him earlier tonight and he was just laughin....it's funny cause we're always giving eachother ****, yet we're always helping eachother on our cars
I just finished up my moser 9" install yesterday, an it rocks. Gone are the days worrying about the weak link. The 3.89s & spool are just the ticket for me. Driving on some 245 street tires for a couple of days to break it in easy, then time for mickeys & beatin the **** out of it. Goin to the track on friday and hopefully some new pb's. 
Thread Starter
TECH Fanatic
iTrader: (4)
Joined: Apr 2005
Posts: 1,010
Likes: 1
From: West Bloomfield MI
That's kick *** Doofy (nice name haha) i can't wait for mine.... i'll be running my 295 BFG street treads for a while...then im gonna look into some 17x11 ZR1 rims and throw some 315 nitto's on the back...
definatly second the no more worries part....like i said before, no more crossing your fingers and holding your breath and hope to god everything is still working after you left it RIP!
definatly second the no more worries part....like i said before, no more crossing your fingers and holding your breath and hope to god everything is still working after you left it RIP!
Thread Starter
TECH Fanatic
iTrader: (4)
Joined: Apr 2005
Posts: 1,010
Likes: 1
From: West Bloomfield MI
trigger1 Scott does good work, I purchased both my 9inch rearend and chrome moly driveshaft from him.
i don't think im going to have any problems with this gigantic rear end with my small head/cam combo i have ..... but next year it'll be bigger and better. i'm just getting everything else ready so the car can take whatever i dish out at it.....
Thread Starter
TECH Fanatic
iTrader: (4)
Joined: Apr 2005
Posts: 1,010
Likes: 1
From: West Bloomfield MI
well the 9 is finally home. picked it and my new driveshaft up today...i was going to get started on it...but once i got home...i was too tired. hopefully i'll get crack'n on it tomarrow after work. took a few pics of it...kinda shitty but you get the idea...i can't wait to get it in, and broken in.
Thanks Again Scott...this thing is Pretty kick ***
Thanks Again Scott...this thing is Pretty kick ***
