Wierd whining..
#1
TECH Apprentice
Thread Starter
iTrader: (2)
Join Date: Mar 2006
Location: Katy, Texas
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
Wierd whining..
Just wondering why this happens. My GM 3.73s only whine when I am decelerating and making a right hand turn. All other times, they don't whine but make a slight noise similar to how it used to sound with my stock gears (I really don't know how to explain the noise other than maybe how it sounds when you rotate your wheels and the brake pads are rubbing against the rotor?)
#5
TECH Apprentice
Thread Starter
iTrader: (2)
Join Date: Mar 2006
Location: Katy, Texas
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
I understand that if they whine, then they may be setup incorrectly, but why would they only whine on deceleration while making a right hand turn?
Fluid is also good. I also used the LSD additive.
Fluid is also good. I also used the LSD additive.
#6
TECH Addict
iTrader: (22)
Originally Posted by RedRyder518
I understand that if they whine, then they may be setup incorrectly, but why would they only whine on deceleration while making a right hand turn?
Fluid is also good. I also used the LSD additive.
Fluid is also good. I also used the LSD additive.
#7
TECH Enthusiast
Join Date: Nov 2001
Location: Queens, NYC and sometimes Orlando
Posts: 661
Likes: 0
Received 3 Likes
on
2 Posts
The first time I ever installed gears I ended up with the same problem....
A slight whine during deceleration and a heavy whine when making a hard right
Turned out to be the carrier needed a couple more shims for the proper bearing preload....
The problem was that the carrier would move while making hard turns, causing the gears to mesh improperly and whine....
Rick
A slight whine during deceleration and a heavy whine when making a hard right
Turned out to be the carrier needed a couple more shims for the proper bearing preload....
The problem was that the carrier would move while making hard turns, causing the gears to mesh improperly and whine....
Rick
Trending Topics
#9
TECH Enthusiast
iTrader: (5)
Join Date: Mar 2005
Location: Louisiana
Posts: 519
Likes: 0
Received 0 Likes
on
0 Posts
Tha only answer is take it to thunder racing where its done right . All this talk about whining and gears make noise wrong. I just got my 4.10 gears installed last week and no noise what so ever. Take it to a place who does it the right way the first time.
#10
TECH Apprentice
Thread Starter
iTrader: (2)
Join Date: Mar 2006
Location: Katy, Texas
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 98 SNAKE EATER
The first time I ever installed gears I ended up with the same problem....
A slight whine during deceleration and a heavy whine when making a hard right
Turned out to be the carrier needed a couple more shims for the proper bearing preload....
The problem was that the carrier would move while making hard turns, causing the gears to mesh improperly and whine....
Rick
A slight whine during deceleration and a heavy whine when making a hard right
Turned out to be the carrier needed a couple more shims for the proper bearing preload....
The problem was that the carrier would move while making hard turns, causing the gears to mesh improperly and whine....
Rick