TAGOES11S

iTrader: (13)

After breaking a few Moser 12 bolts I had Scott at Driveline Solutions build a 9" with a Tru-trac. Just wondering how fast people have gone and if it has survived. If you have broke please list what you broke and your set-up.

I have 550 rwhp, 3,500lbs, 6 Speed, Mcleod Twin Disk, 28" ET streets and cut 1.4-1.5 60's. Probably on a ragged edge of a Tru-Trac, but lets see who's broke and what the limits are.

Dan

2001z

iTrader: (32)

I just ordered mine a week ago too from scott cant wait for the 9in to arrive.

Nittany_marine

iTrader: (7)

1.7, NO breakage, and drove it home without even a single whine, or squeal, or anything. Good job, going with Scott. Top notch.

TXCAMSS

iTrader: (60)

I've gone multiple 1.38 60fts with a Moser 12 bolt with the Tru-Trac pushing a 3500#+ car.

So far so good!

Anti-Vnm

iTrader: (14)

I haven't been to the track yet with my Dana and am also wondering what the limits will be.

SS4Matt

iTrader: (4)

when i picked up my 9" from scott he said they're good for low 10's and some solid abuse!

I'll be proud of myself if i manage to break mine and find it's limit!!!

TAGOES11S

iTrader: (13)

Wonder if we could make this a sticky?

TAGOES11S

iTrader: (13)

anyone else?

QUASAR

iTrader: (6)

1.70 60' so far on a 26x10.50 et street. Should pick up with some more susupension work, and should pick up alot with a e/t drag. Will let you know how it goes. It also gets road raced and daily driven.

TXCAMSS

iTrader: (60)

Update! Check out sig for info. Rolls out straight and hooks hard.

SSmokin 01

iTrader: (14)

Strange 12bolt behind a 6xx rwhp M6 and has seen about 7-8 passes so far at the track. Launching at 4k-5k on 325/50/15 MT DR with 1.6-1.7 60' @ 3750 lbs.

Hoosier 28x13.5 QTP's will be on it next time out.

TXCAMSS

iTrader: (60)

Now that is a true test of strength.

jerflash

ya preston i cant wait to see your car actually hook nice

i need some of those tires as well

qqwqeqwrqwqtq

1.54 60ft 9.8@146, 3,820lbs on 275 40 17 et street radials.

True trac diff, 31 spline axles, 3.25 gear and aluminum housing. So far so good.

TXCAMSS

iTrader: (60)

I've now gone 10.04 with a 1.29 60ft. The tru-trac is proven boyz

Rabidbandit

Bill's car is hitting 1.48's pretty consistantly so far....moser 12 4.10's and about 80 passes total at 3620lb full interior(25 with dumps about 6600k with the new clutch lately.) We toasted the first one...but it didn't look machined right...factory defect I'm assuming...that and the freakin moser's preload was way off...cookie cutter rears suck. We finally have the bugs worked out though

myfast70

iTrader: (38)

I've talked to the tech guys at Detroit and they have said that you can use up 1000hp with a true-trac unit and still have it live. Not sure though.

SSblack98

iTrader: (8)

I'm sure it really depends on not so much how much rwhp you have but how much you have off the starting line and how severe the launch and shock to the rear is.

I'm sure as Intimid8 has shown they will live with 1000rwhp but its not like a turbo car with a M6 has anywhere near that much off the line.

I would say if anyone is going to break one it would be a 6spd car spraying a big shot off the line. I bet you would be hard pressed to break one with an auto and foot brake.

SPRAYED 01

iTrader: (22)

10.8 with a 1.5 60ft, no problems.

TeEnAgE pHeNoM

iTrader: (6)

See times in sig! I don't lunch very hard nor does the car 60' hard but that 640 RWTQ seems like it would put a load on the rear end! Did I mention I was on the stock driveshaft...