Midwest Chassis fabricated 9 inch
11-02-2007, 12:11 AM
#83
I'm using the super-nice Strange billet ends designed for the gm brake pattern. those brackets will work fine, all we'd have to do is drill the bolt pattern into the plates. i'd even cut off the excess on the top for the old style setup.
11-02-2007, 09:02 AM
#85
Launching!
iTrader: (2)
Join Date: Dec 2006
Location: Beloeil, Quebec, Canada
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
The brackets I have were to convert a 82-92 10 bolts to c6Z brakes. Should I just buy the Kore3 98-02 brackets and be done with it? With the Kore3 design, bearings could be already installed right? I would just have to slide the axles and be done with it.
11-02-2007, 10:40 AM
#86
Sounds good, so I dont have to worry about buying new backing plates? Im going with C6Z rears, they will bolt right on the Strange ends?
The brackets I have were to convert a 82-92 10 bolts to c6Z brakes. Should I just buy the Kore3 98-02 brackets and be done with it? With the Kore3 design, bearings could be already installed right? I would just have to slide the axles and be done with it.
The brackets I have were to convert a 82-92 10 bolts to c6Z brakes. Should I just buy the Kore3 98-02 brackets and be done with it? With the Kore3 design, bearings could be already installed right? I would just have to slide the axles and be done with it.
11-07-2007, 12:07 AM
#94
that and some more pics will be posted in a couple days. i'm also gonna list the weight of most of the components, including center sections. the base price is 2400.00 including a center section, complete housing with built-in lca relocators sway bar mounts and drain, torque arm and crossmember for either tunnel mount or trans crossmember mount.
Last edited by ssvert99; 11-09-2007 at 11:59 AM.
11-09-2007, 10:55 AM
#96
they're coming, they're coming! lol i will have some more pics of the components and install pics in a mini-tub job that is here in my shop now. these will be uncoated parts and a full-length t/a setup with the new built-in lca relocators. nothing to hide. i will also weigh all the components seperately and let everybody know that i have the lightest, best quality parts available.
11-09-2007, 11:38 AM
#100
On The Tree
Join Date: Oct 2006
Location: San Antonio
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
Wells guys i got the first one for a 4th gen with a street app. and it has been great. I have his suspension as well and everything is easy to install. I have been helping eric with a few changes that have had to be done because of being so new but everything will be worked out by the time you all get yours. Start buying people. Great product and eric is a stand up guy that does great quality work.