M6 gears.?.?.?. drag guys here
#1
Teching In
Thread Starter
iTrader: (2)
Join Date: Dec 2006
Location: ElDorado Arkansas
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
M6 gears.?.?.?. drag guys here
what gear do you guys suggest for a Ws6 430 rwhp motor 560 on spray. 28 inch slicks. I know the theoretical gear for this application, looking for real world experience...thanks guys
Trending Topics
#9
TECH Junkie
iTrader: (13)
Join Date: Sep 2004
Location: Fort Myers, FL.
Posts: 3,857
Likes: 0
Received 0 Likes
on
0 Posts
I have a 3.73 and have a 150 shot on it right now. It is a great gear for the street and does good at the track- good all around gear.
if you are looking for all out you need to get 4.10's or higher.
if you are looking for all out you need to get 4.10's or higher.
#10
TECH Senior Member
iTrader: (1)
Join Date: Nov 2001
Location: Waco, TX
Posts: 6,449
Likes: 0
Received 0 Likes
on
0 Posts
If your motor can handle 7k-7200 rpms and your goal on spray is ~135 mph or less, then 4.56s and a 28" tire would be the way to go.
Any more than either of those and you should drop back to 4.30's.
4.30's aren't nearly as fun though.
Any more than either of those and you should drop back to 4.30's.
4.30's aren't nearly as fun though.
#12
TECH Junkie
iTrader: (17)
i ran a 27.3" tall tire and with 4.30's NA i was crossing the traps at 6400 (200 rpm before the limiter) at 124 mph
i now am spraying, only a 75 for now, and have stepped up to 28x1050's and im hoping to eek out 130 out of them at th 6600 limiter
may have to drop down to 4.10's
i now am spraying, only a 75 for now, and have stepped up to 28x1050's and im hoping to eek out 130 out of them at th 6600 limiter
may have to drop down to 4.10's