So, I bought one of them thar Camero's
#1
So, I bought one of them thar Camero's
I figured the misspelling would get your attention, as usual
Over on www.PlanetLSX.com we have a new project car. 2010 Camaro SS with the stick. We'll be doing baselines on it, bolt-ons, and then a Magnacharger. Results good OR bad will be disclosed in our upcoming series of articles on the project. Anyways, here is the introduction:
http://www.planetlsx.com/news/Planet...ect__Camaro/78
Tony
Over on www.PlanetLSX.com we have a new project car. 2010 Camaro SS with the stick. We'll be doing baselines on it, bolt-ons, and then a Magnacharger. Results good OR bad will be disclosed in our upcoming series of articles on the project. Anyways, here is the introduction:
http://www.planetlsx.com/news/Planet...ect__Camaro/78
Tony
#2
I figured the misspelling would get your attention, as usual
Over on www.PlanetLSX.com we have a new project car. 2010 Camaro SS with the stick. We'll be doing baselines on it, bolt-ons, and then a Magnacharger. Results good OR bad will be disclosed in our upcoming series of articles on the project. Anyways, here is the introduction:
http://www.planetlsx.com/news/Planet...ect__Camaro/78
Tony
Over on www.PlanetLSX.com we have a new project car. 2010 Camaro SS with the stick. We'll be doing baselines on it, bolt-ons, and then a Magnacharger. Results good OR bad will be disclosed in our upcoming series of articles on the project. Anyways, here is the introduction:
http://www.planetlsx.com/news/Planet...ect__Camaro/78
Tony
Close to 600/600 to the wheels?
I think you should to the Techco 3.0 twin screw instead.
Have you checked their blower out?
All billet, reverse rotation, pretty amazing stuff
http://forums.corvetteforum.com/c6-f...eo-inside.html
Last edited by 427C5; 06-10-2009 at 07:12 PM.
#4
Why not just do the RIGHT blower the 1st time so you can make 600rwhp
AND up to 1000rwhp later if you choose ????
Well , at least Eaton FINALLY made a blower worth putting on a LSx.
I think the other 2 blowers you had were a joke on a LSx engine.
I hope you are getting all of them for free from them.
It's a shame you didn't take a look at the Techco. It appears to be a much better blower.
AND up to 1000rwhp later if you choose ????
I think the other 2 blowers you had were a joke on a LSx engine.
I hope you are getting all of them for free from them.
It's a shame you didn't take a look at the Techco. It appears to be a much better blower.
#5
Always the Magnacharger hater. Did Magnacharger steal one of your girlfriends or kick sand in your face as a kid? LOL!
I have multiple cars, I don't need every car to be a 1,000 HP monster. In fact, I've never owned a 1,000 HP car, and I've been plenty happy with all of the cars so far. Maybe I'm just a 600 HP kinda guy?
I have multiple cars, I don't need every car to be a 1,000 HP monster. In fact, I've never owned a 1,000 HP car, and I've been plenty happy with all of the cars so far. Maybe I'm just a 600 HP kinda guy?
Trending Topics
#8
What do you think of the Techco 3.0 twin screw? I think it might be the best FI option available for 600rwhp.
That's your 2nd CGW color car.
#12
beard, I'm gonna keep you in suspense until the wheels are on the car
Hard to judge without seeing it in person and driving one. I mean really, my butt isn't good enough to tell 600 rwhp via one kit vs another 600 rwhp kit. They both feel fun to me. One thing I do like about the Eatons is the OEM reliability and how nice their kits install. TVS will be plenty fun for now. I may get crazy later on and build an engine and go with a pair of turbos. Unless I do that on one of the '69s instead...
What do you think of the Techco 3.0 twin screw? I think it might be the best FI option available for 600rwhp.
#13
I assume you're getting some gratis from Magnacharger.
If not, and you were my friend, I would try really hard to convince you to do the Techco instead.
#14
The Techco guys were hoping to hit low 500 rwhp. That isn't a big deal. Their system is also about $2K more than a Magna. I'm not sure why you feel so passionate about a system that hasn't even been proven yet. But, I understand you hate Magnacharger and that everything else under the sun is better in your eyes. No problem! I'm not a newbie to mods, so I think I can handle my own decisions.
#15
The Techco guys were hoping to hit low 500 rwhp. That isn't a big deal. Their system is also about $2K more than a Magna. I'm not sure why you feel so passionate about a system that hasn't even been proven yet. But, I understand you hate Magnacharger and that everything else under the sun is better in your eyes. No problem! I'm not a newbie to mods, so I think I can handle my own decisions.
Techco has already made 600rwhp on a stock longblock. So, I don't know where you are getting 500hp from. $2k more?
Techco is dong their 3.0L twin screw, installed and tunes, for $8,500.
A FI system that will make 600rwhp on a stock engine that still offers the ability to make 1000rwhp with a built motor is a STEAL at that price.
If you took 5 minutes to check out the Techco and their 3.0L twin screw blower's design, you'd see why I, and many others, think it's impressive.
I know that BOTH of us have been modding close to 20 years.
Why don't you just check Techco out and let us know what you think?
For the record, I CLEARLY posted that I think EATON finally did a good job on their TVS 2300. I'd take a EATON TVS 2300 over a STS, and a even a centri blower, on Camaro/G8 with a stock longblock.
Last edited by 427C5; 06-12-2009 at 10:20 PM.
#16
Well, if Techco wants to send a kit for me to test on the Camaro, I won't turn it down. I'll be just fine with 600 rwhp on this car for now. I won't ever buy another centrifugal blower again, they just don't have the throttle response I like. My 675 rwhp Paxton Viper feels slow until 100 mph. I like my grunt and throttle snap instant. I don't really care about 1,000 hp if I only want 600. You always have that philosophy that we should always buy the kit that has the highest potential. I always have the philosophy to buy mods with my intended target goals. That is 600 rwhp. I'd rather do turbos above that, just MY personal preference. I hate throwing belts at higher HP.
#18
Staging Lane
Join Date: Oct 2007
Location: Crystal River, Fl.
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Tony with only 600 horsepower can you win a race in Texas?
I have been toying with the idea of buying a new Camaro. I love the new retro look. Since we both have a 69 Camaro and Viper if I buy a new Camaro I don't want to hear the word copycat.
I have been toying with the idea of buying a new Camaro. I love the new retro look. Since we both have a 69 Camaro and Viper if I buy a new Camaro I don't want to hear the word copycat.