Car Dilema...Sell WS6&Buy 03 Cobra
#84
TECH Fanatic
Thread Starter
iTrader: (1)
Join Date: Aug 2007
Posts: 1,613
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Lol yes yes, but I still need to get another car. Even if i chose to grab another WS6 from the states (im in canada) it would end up costing me the same. Similar mileage car and condition.
#92
TECH Fanatic
iTrader: (4)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I've been hanging around the Terminator Mustang forums for a while and it looks like the majority of bolt on cars there are running around 450whp - 470rwhp with...
-CAI $200
-TB $500
-Pully $100
-MAF $275
-Headers/ x-pipe $1200
-Catback $500
-Dyno Tune $500
Basically around $3200-$3300
But like on Thunder Racing's web site they show dyno results where you could take a 01'-02' LS1 and get over 450whp with...
Cam Kit $720
UD Pulley $200
Lid $90
P&P TB $65
Long Tubes/ y-pipe $1200
Cat Back $500
Dyno Tune $500
Basically around $3200-$3300 as well. Seems like the Termi would be the best buy if you were planning on making huge horse power like 500-600whp right? But below that like an F-body or C5 Vette seems like a good choice.
Here's the dyno graph by the way for the f-body HP numbers...
-CAI $200
-TB $500
-Pully $100
-MAF $275
-Headers/ x-pipe $1200
-Catback $500
-Dyno Tune $500
Basically around $3200-$3300
But like on Thunder Racing's web site they show dyno results where you could take a 01'-02' LS1 and get over 450whp with...
Cam Kit $720
UD Pulley $200
Lid $90
P&P TB $65
Long Tubes/ y-pipe $1200
Cat Back $500
Dyno Tune $500
Basically around $3200-$3300 as well. Seems like the Termi would be the best buy if you were planning on making huge horse power like 500-600whp right? But below that like an F-body or C5 Vette seems like a good choice.
Here's the dyno graph by the way for the f-body HP numbers...
![](http://www.thunderracing.com/images/dynos/jason_trex_stockheads.gif)
#94
On The Tree
iTrader: (9)
Join Date: Jan 2009
Location: Mechanicsburg PA
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I would say stay with the F-body. They are a lot more cheaper to buy than the Cobras (at least around here). Cobras do sound and look nice though, but not worth the extra cash IMO.
#95
Moderator
iTrader: (15)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I've been hanging around the Terminator Mustang forums for a while and it looks like the majority of bolt on cars there are running around 450whp - 470rwhp with...
-CAI $200
-TB $500
-Pully $100
-MAF $275
-Headers/ x-pipe $1200
-Catback $500
-Dyno Tune $500
Basically around $3200-$3300
But like on Thunder Racing's web site they show dyno results where you could take a 01'-02' LS1 and get over 450whp with...
Cam Kit $720
UD Pulley $200
Lid $90
P&P TB $65
Long Tubes/ y-pipe $1200
Cat Back $500
Dyno Tune $500
Basically around $3200-$3300 as well. Seems like the Termi would be the best buy if you were planning on making huge horse power like 500-600whp right? But below that like an F-body or C5 Vette seems like a good choice.
Here's the dyno graph by the way for the f-body HP numbers...
![](http://www.thunderracing.com/images/dynos/jason_trex_stockheads.gif)
-CAI $200
-TB $500
-Pully $100
-MAF $275
-Headers/ x-pipe $1200
-Catback $500
-Dyno Tune $500
Basically around $3200-$3300
But like on Thunder Racing's web site they show dyno results where you could take a 01'-02' LS1 and get over 450whp with...
Cam Kit $720
UD Pulley $200
Lid $90
P&P TB $65
Long Tubes/ y-pipe $1200
Cat Back $500
Dyno Tune $500
Basically around $3200-$3300 as well. Seems like the Termi would be the best buy if you were planning on making huge horse power like 500-600whp right? But below that like an F-body or C5 Vette seems like a good choice.
Here's the dyno graph by the way for the f-body HP numbers...
![](http://www.thunderracing.com/images/dynos/jason_trex_stockheads.gif)
Just to make things clear, my close friend just sold his 03 Cobra. Very quick car BTW.
CAI (K+N) $300
2.8 Steeda pulley w/idler $250
Diablo canned tune $399
FM CB $600
TR6 plugs $50
Gates belt $45
472rwhp/451rwtq ($1,644)
They don't need a MAF, TB or Full exhaust to break 460+rwhp.
#96
Teching In
Join Date: Oct 2008
Location: South Orange County, CA
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Just to make things clear, my close friend just sold his 03 Cobra. Very quick car BTW.
CAI (K+N) $300
2.8 Steeda pulley w/idler $250
Diablo canned tune $399
FM CB $600
TR6 plugs $50
Gates belt $45
472rwhp/451rwtq ($1,644)
They don't need a MAF, TB or Full exhaust to break 460+rwhp.
CAI (K+N) $300
2.8 Steeda pulley w/idler $250
Diablo canned tune $399
FM CB $600
TR6 plugs $50
Gates belt $45
472rwhp/451rwtq ($1,644)
They don't need a MAF, TB or Full exhaust to break 460+rwhp.
I spent about $1,500.00 on it since I got a few of the parts used.
#98
TECH Fanatic
Thread Starter
iTrader: (1)
Join Date: Aug 2007
Posts: 1,613
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Still up in the air about everything. Saw a ws6 last nite and really made me forget what these cars look like when they're out on the road.
As far as hp goes, I was originally gonna do bolt ons and keep it very clean. Then I started to look into some mild cams such as the TR224 that is ever so popular. I like this cam because I dont have to rev the crap out of the motor, and would still be OK on the stock rod bolts.
**Briefly to go off topic but what can one expect rwhp wise, with full bolt ons, TR224 and whichever heads are the best for this particular camshaft?**
As far as hp goes, I was originally gonna do bolt ons and keep it very clean. Then I started to look into some mild cams such as the TR224 that is ever so popular. I like this cam because I dont have to rev the crap out of the motor, and would still be OK on the stock rod bolts.
**Briefly to go off topic but what can one expect rwhp wise, with full bolt ons, TR224 and whichever heads are the best for this particular camshaft?**