Who ports tb's?
08-16-2009 | 02:15 AM
#1
Who ports tb's? I'm looking for someone on here who used to port tb's and I prob still does but yea. I want to send mine out in october or november when my car is away for the winter anyways and have it ported. Anyone who has had people do it post up and refer me to them, only show me people who do great work please! Thanks
good job cheap and fast turn around. Trending Topics
08-17-2009 | 03:16 PM
#9
08-17-2009 | 03:23 PM
#10
do it yourself....takes an hour if your working slow as ****.....well maybe three hours if you paint it too, thats what i did and the paint i picked worked as good as any podercoat.
08-19-2009 | 01:12 PM
#12
Yes, I offer full porting and of course also powder coating services as well
Here is a gallery on my site of various throttle bodies done by myself
http://thepowderpro.com/gallery/?level=album&id=6
08-21-2009 | 11:10 AM
#13
Whatever you do go with someone reputable...I thought i did, but just found out my ported T/B was giving me idle issues. Took out too much material around the blade and knife edged it.
Of course i had it powdercoated too so that was $140 (total) down the drain! If only i would have waited and let Sean do it
Sean- how much to coat my new T/B? and can i use the linkage and spring off my old one? Cuz you already did that
Of course i had it powdercoated too so that was $140 (total) down the drain! If only i would have waited and let Sean do it Sean- how much to coat my new T/B? and can i use the linkage and spring off my old one? Cuz you already did that
08-23-2009 | 01:01 AM
#15
Whatever you do go with someone reputable...I thought i did, but just found out my ported T/B was giving me idle issues. Took out too much material around the blade and knife edged it. Of course i had it powdercoated too so that was $140 (total) down the drain! If only i would have waited and let Sean do it Sean- how much to coat my new T/B? and can i use the linkage and spring off my old one? Cuz you already did that
Of course i had it powdercoated too so that was $140 (total) down the drain! If only i would have waited and let Sean do it Sean- how much to coat my new T/B? and can i use the linkage and spring off my old one? Cuz you already did thatI'm totally screwing myself out of some work by saying this(lol), but just take the blade from the new one you got and swap it into the ported one. As long as the old throttle shaft isn't tampered with and holds the new blade ok, you're fine. if you need to change the shaft also, you could just send me that so I can re-coat the cam gear. Give me a call if ya need anything.
Sean
08-23-2009 | 01:28 AM
#16
So it was the blade? Like I told you when you called the other week, that was my guess, b/c I remembered noticing yours was knife edged when I took it apart to coat it.
I'm totally screwing myself out of some work by saying this(lol), but just take the blade from the new one you got and swap it into the ported one. As long as the old throttle shaft isn't tampered with and holds the new blade ok, you're fine. if you need to change the shaft also, you could just send me that so I can re-coat the cam gear. Give me a call if ya need anything.
Sean
I'm totally screwing myself out of some work by saying this(lol), but just take the blade from the new one you got and swap it into the ported one. As long as the old throttle shaft isn't tampered with and holds the new blade ok, you're fine. if you need to change the shaft also, you could just send me that so I can re-coat the cam gear. Give me a call if ya need anything.
Sean
Didnt run it that way but i held the it up toward the light and i could still see light all the way around the blade. To me it just looks like he took out too much material. Was the about same with both blades in. Couldnt see hardly anything on the untouched T/B 
08-24-2009 | 07:09 PM
#18
Last edited by StoleIt; 08-25-2009 at 08:12 PM.
08-24-2009 | 08:06 PM
#20
Unless Jantzer has cleaned up his act I'd stay away from him...do a search and you'll find multiple threads
Here's one
https://ls1tech.com/forums/generatio...rformance.html
I had my throttle body done by "photz6" on eBay, he did a great job and his prices are really good. His listings are pretty interesting too, kind of hard to miss them with the way he advertises.
Here's one
https://ls1tech.com/forums/generatio...rformance.html
I had my throttle body done by "photz6" on eBay, he did a great job and his prices are really good. His listings are pretty interesting too, kind of hard to miss them with the way he advertises.