itsback08

iTrader: (12)

just wondering what people think of my set up and how much hp i'll make.
its a 408 with flat tops. 225 afr heads. CR11.5 victor jr intake with either an elbow or a fast 4500tb. (think that is it) cam is a solid roller 264-272- 673-673 LSA 110. tranny is a 6 speed. 12 bolt 4.10's

hoping for 550rwhp? TQ??

all motor this build till next time will be an F1

raymond mckinney

iTrader: (4)

That set-up should make 500 at the tires. Port the Victor Jr. and get a 4500tb though.

itsback08

iTrader: (12)

any ideas how to get some more power out of it? keeping in NA and pump gas.

teke184

iTrader: (5)

have tony mamo touch up the heads...

itsback08

iTrader: (12)

who is that? what shop does he have?

teke184

iTrader: (5)

tony mamo = AFR

pricey on top of the head cost already....but it will make a top of the line head...even better

itsback08

iTrader: (12)

ok. i'll give them a call. thanks. the cam is good tho? just have the heads worked?

teke184

iTrader: (5)

no clue on the cam....MUCH bigger than anything i'm used to seeing. besides its SR...again...not what i know much about.

but heads are the obvious place to make more power. and while the AFRs are great...there IS room for improvement.

there are 500rwhp 346ci cars out there with tweaked AFR heads....imagine what they'll do on a stroker!!!

itsback08

iTrader: (12)

yea i had a nice 346 but want more power NA. i have a different cam its 247-251 656-660 LSA111 witch of the two cams would be better? i have all the parts to go either way. i was just told the SR.....but will definitely get the heads worked. would like to have 550rwhp and as much TQ as i can get