What do you have invested in you car????
#102
2500 for car
425 for 4 chrome stock wheels 4 street tires and 2 new Dr tires with exhaust
125 for 2 front runners with tires
80 hypertec programer
free stock rear axle with 410's
free Ta lid
free front coils and adjustable shocks
free shop hours and lift plus help
25 for the bottle to get filled
100+ for service items
still need want a few things
just the usal stuff headers & exhaust, cam, and intake
but less than two months after buying it we are going to track and hope the 10 bolt axle does not brake!!! and beat a challenger
425 for 4 chrome stock wheels 4 street tires and 2 new Dr tires with exhaust
125 for 2 front runners with tires
80 hypertec programer
free stock rear axle with 410's
free Ta lid
free front coils and adjustable shocks
free shop hours and lift plus help
25 for the bottle to get filled
100+ for service items
still need want a few things
just the usal stuff headers & exhaust, cam, and intake
but less than two months after buying it we are going to track and hope the 10 bolt axle does not brake!!! and beat a challenger
#103
Ya know by the time its all said and done I see it beeing around 14 to 17 grand,do I think that is a lot,yes,but I just think you couldn't go buy a new car with as much performance,now when the c6s get a lil cheaper I might get one of those,but I just love my camaro I don't think I could ever get rid of it,no matter how much the woman hates it lol
#108
Got about 22k in mine at the moment. Has major engine failure about a year and a half ago and have since had to rebuild. Don't feel bad about it when I hammer it and it sets me back in the seat and looking at it.
#109
Can we change the title to "How much have you wasted?"
16k purchase at least 10k in maintence, 2 rears, new engine,heads, cam , intake, 2 sets of rims.
If I could do it over I would of just bought a Ws6 and left it stock
16k purchase at least 10k in maintence, 2 rears, new engine,heads, cam , intake, 2 sets of rims.
If I could do it over I would of just bought a Ws6 and left it stock
#110
Car: $5250
New Tires: $500
New Pads and Rotors: $200
Little $H!T: $300
Magnaflow Catback: $200
QTP headers and Y: $450
Only had it for eight months. I wish college and girls weren't so damn expensive
New Tires: $500
New Pads and Rotors: $200
Little $H!T: $300
Magnaflow Catback: $200
QTP headers and Y: $450
Only had it for eight months. I wish college and girls weren't so damn expensive
#111
I feel you on that one. Im in college right now as a full time student, work 2 jobs and have a girlfriend. **** sucks but what can you do. I'm about to add all my **** up I bought for the camaro it's no were near some of these guys.
#112
Let's see
* repersent stuff bought used
To Start off
Sold my 97gt for $3200 (Best decision ever)
+3200
Bought my 1999 Camaro SS for $3750 (-3200, basically paid $550 for it)
LS6 Intake $250 (Blew it Up)
BBK Intake Manifold & Gaskets $470
*KOOK's 1 3/4 LT & ORY $700
*HSW Nitrous Plate kit & ash tray switch $420
*Timing Tuner $170
HSW Nitrous Solenoid $100
*TSP 228R cam $250
*TSP Harden PR's $70
TSP LS6 Ported Oil Pump$110
LS1 Timing Chain $60
* 918 Behive Springs FREE
*ASP Underdrive Pulley FREE
Belts for pulley $25
*Hurst Shifter **** $25
MGW Shifter $260
Diamond Stage 3 Clutch $760
* STB $30
UMI SFC,LCA and LCA Brackets $310
Hotchiks Double Adj Pan Hard Bar $120
*Ruff Racing 278's $700
Hankook V12 tires $750
2 Nitto 555RII's $600
LED Bulbs for interior $60
Tune $100 ( a friend tuned it for cost of credits)
Depending on how you look at it I have right at $6000 in it and either $6500 or $9750 with the car lol.
* repersent stuff bought used
To Start off
Sold my 97gt for $3200 (Best decision ever)
+3200
Bought my 1999 Camaro SS for $3750 (-3200, basically paid $550 for it)
LS6 Intake $250 (Blew it Up)
BBK Intake Manifold & Gaskets $470
*KOOK's 1 3/4 LT & ORY $700
*HSW Nitrous Plate kit & ash tray switch $420
*Timing Tuner $170
HSW Nitrous Solenoid $100
*TSP 228R cam $250
*TSP Harden PR's $70
TSP LS6 Ported Oil Pump$110
LS1 Timing Chain $60
* 918 Behive Springs FREE
*ASP Underdrive Pulley FREE
Belts for pulley $25
*Hurst Shifter **** $25
MGW Shifter $260
Diamond Stage 3 Clutch $760
* STB $30
UMI SFC,LCA and LCA Brackets $310
Hotchiks Double Adj Pan Hard Bar $120
*Ruff Racing 278's $700
Hankook V12 tires $750
2 Nitto 555RII's $600
LED Bulbs for interior $60
Tune $100 ( a friend tuned it for cost of credits)
Depending on how you look at it I have right at $6000 in it and either $6500 or $9750 with the car lol.
#114
Let's see
* repersent stuff bought used
To Start off
Sold my 97gt for $3200 (Best decision ever)
+3200
Bought my 1999 Camaro SS for $3750 (-3200, basically paid $550 for it)
LS6 Intake $250 (Blew it Up)
BBK Intake Manifold & Gaskets $470
*KOOK's 1 3/4 LT & ORY $700
*HSW Nitrous Plate kit & ash tray switch $420
*Timing Tuner $170
HSW Nitrous Solenoid $100
*TSP 228R cam $250
*TSP Harden PR's $70
TSP LS6 Ported Oil Pump$110
LS1 Timing Chain $60
* 918 Behive Springs FREE
*ASP Underdrive Pulley FREE
Belts for pulley $25
*Hurst Shifter **** $25
MGW Shifter $260
Diamond Stage 3 Clutch $760
* STB $30
UMI SFC,LCA and LCA Brackets $310
Hotchiks Double Adj Pan Hard Bar $120
*Ruff Racing 278's $700
Hankook V12 tires $750
2 Nitto 555RII's $600
LED Bulbs for interior $60
Tune $100 ( a friend tuned it for cost of credits)
Depending on how you look at it I have right at $6000 in it and either $6500 or $9750 with the car lol.
* repersent stuff bought used
To Start off
Sold my 97gt for $3200 (Best decision ever)
+3200
Bought my 1999 Camaro SS for $3750 (-3200, basically paid $550 for it)
LS6 Intake $250 (Blew it Up)
BBK Intake Manifold & Gaskets $470
*KOOK's 1 3/4 LT & ORY $700
*HSW Nitrous Plate kit & ash tray switch $420
*Timing Tuner $170
HSW Nitrous Solenoid $100
*TSP 228R cam $250
*TSP Harden PR's $70
TSP LS6 Ported Oil Pump$110
LS1 Timing Chain $60
* 918 Behive Springs FREE
*ASP Underdrive Pulley FREE
Belts for pulley $25
*Hurst Shifter **** $25
MGW Shifter $260
Diamond Stage 3 Clutch $760
* STB $30
UMI SFC,LCA and LCA Brackets $310
Hotchiks Double Adj Pan Hard Bar $120
*Ruff Racing 278's $700
Hankook V12 tires $750
2 Nitto 555RII's $600
LED Bulbs for interior $60
Tune $100 ( a friend tuned it for cost of credits)
Depending on how you look at it I have right at $6000 in it and either $6500 or $9750 with the car lol.
#115
'00 WS6 - $3500
bullet proof 4L60E rebuild - $1500
rear end - gun trade
New Stainless headers, y-pipe & poly motor mounts - gun trade
C6 ZO6 rims - $800
Eagle F1SC EMT tires - $200 front, $270 rear pairs
New K&N FIPK - $296
Fillers, primers, fiberglass etc - $250ish
Car PC supplies - $200
My own time/satisfaction - Priceless (unless you ask my wife) haha
And I still have a LOOOOOOT to do. This project has barely started. I'll still need mufflers and exhaust install, over $2000 in suspension parts, a whole hell of a LOT of interior fabrication, seats, steering wheel, some custom body work, paint, supercharger and accompanying engine work and just SO damn much more. What a money pit, eh?! haha
bullet proof 4L60E rebuild - $1500
rear end - gun trade
New Stainless headers, y-pipe & poly motor mounts - gun trade
C6 ZO6 rims - $800
Eagle F1SC EMT tires - $200 front, $270 rear pairs
New K&N FIPK - $296
Fillers, primers, fiberglass etc - $250ish
Car PC supplies - $200
My own time/satisfaction - Priceless (unless you ask my wife) haha
And I still have a LOOOOOOT to do. This project has barely started. I'll still need mufflers and exhaust install, over $2000 in suspension parts, a whole hell of a LOT of interior fabrication, seats, steering wheel, some custom body work, paint, supercharger and accompanying engine work and just SO damn much more. What a money pit, eh?! haha
#116
I would have loved to have a trade when I bought this car but I daily'd an 85Z with the original 305 for 4 yrs til I bought this one. I probably could have sold it for $1500 if that. I've got it stored at my parents and it gets started once a week. When I graduate, It will get a 6.0 or something cheap and fast that I get to build in my spare time. Not just doing things to this because i have a Sat free once a month if that.
Hell I have only had the SS for 7 months and it was completely stock when I got it. No it has all the things I listed and it still needs a little more 12 bolt but I wouldn't change anything about it. I love the car and it out runs a lot of cars that cost 10 times as much as mine
#117
Ok here goes.
Paid $8500 for the car
Mods first:
SLP SS floor mats $100
SLP SS grille $250
SLP SS chrome center caps $50
BBK LTs w/ ORY & 02 sensor extensions $535
Pipe to connect ORY to catback $50
Magnaflow tips $140 (sold for $80 used)
Poly motor mounts $60
Pro 5.0 shifter $180
LS7 Clutch $350
Tick master cylinder $320
SJM line lock $150
UMI 3 pt SFCs $300
UMI tunnel brace mount torque arm w/ DSL $400 (sold w/ crossmember damaged for $150)
UMI Rear LCAs $220
UMI adjustable panhard bar $120
Bilstein shocks $420
Strano springs $300
LS6 intake $275
SLP lid, used $75
Taylor 10.4 mm wires $80
TSP cam package $660
Dynotune for cam install $450
LS6 ported oil pump $150
LS2 timing chain $40
LS2 lifter trays $40
LS7 lifters $130
TFS 215 cylinder heads $2100
GM MLS gaskets $65
ARP head bolts $160
LS6 coolant tube kit $50
Yella Terra rockers $420
Summit 7.550 pushrods for TFS 215s $120
SVO 42# injectors $330
GMMG catback $772
MWC 9 inch rear w/ long TA $2700
added backbrace option $140
added billet posi $100
added powdercoat $125
PST steel driveshaft $300
MWC driveshaft loop $85
2 sets of Nitto DRs $600
New not installed yet MT DRs 275 40 17s $425
LC-1 wideband $190
HPTuners Pro $650
The tuning book $50
Other parts that went bad:
Rear brake pads $50
Belt tensioners $90
A/C & drive belts $50
L. window motor $45
Power window master switch $20
Stock Hurst shifter **** $70
power steering line $35
A/C Delco plugs $45
Valve cover gaskets $25
intake gaskets $28
New console lid $175
Remove & sell Altezza taillights & replace with used stock ones $50
Replace radio with stock Monsoon CD player $60
Used posi unit FREE
Rebuild the stock 10 bolt $300
rear sway bar links $20
Bought headliner material & installed new headliner $35
Paid $8500 for the car
Mods first:
SLP SS floor mats $100
SLP SS grille $250
SLP SS chrome center caps $50
BBK LTs w/ ORY & 02 sensor extensions $535
Pipe to connect ORY to catback $50
Magnaflow tips $140 (sold for $80 used)
Poly motor mounts $60
Pro 5.0 shifter $180
LS7 Clutch $350
Tick master cylinder $320
SJM line lock $150
UMI 3 pt SFCs $300
UMI tunnel brace mount torque arm w/ DSL $400 (sold w/ crossmember damaged for $150)
UMI Rear LCAs $220
UMI adjustable panhard bar $120
Bilstein shocks $420
Strano springs $300
LS6 intake $275
SLP lid, used $75
Taylor 10.4 mm wires $80
TSP cam package $660
Dynotune for cam install $450
LS6 ported oil pump $150
LS2 timing chain $40
LS2 lifter trays $40
LS7 lifters $130
TFS 215 cylinder heads $2100
GM MLS gaskets $65
ARP head bolts $160
LS6 coolant tube kit $50
Yella Terra rockers $420
Summit 7.550 pushrods for TFS 215s $120
SVO 42# injectors $330
GMMG catback $772
MWC 9 inch rear w/ long TA $2700
added backbrace option $140
added billet posi $100
added powdercoat $125
PST steel driveshaft $300
MWC driveshaft loop $85
2 sets of Nitto DRs $600
New not installed yet MT DRs 275 40 17s $425
LC-1 wideband $190
HPTuners Pro $650
The tuning book $50
Other parts that went bad:
Rear brake pads $50
Belt tensioners $90
A/C & drive belts $50
L. window motor $45
Power window master switch $20
Stock Hurst shifter **** $70
power steering line $35
A/C Delco plugs $45
Valve cover gaskets $25
intake gaskets $28
New console lid $175
Remove & sell Altezza taillights & replace with used stock ones $50
Replace radio with stock Monsoon CD player $60
Used posi unit FREE
Rebuild the stock 10 bolt $300
rear sway bar links $20
Bought headliner material & installed new headliner $35
#118
TECH Addict
iTrader: (41)
Joined: Feb 2007
Posts: 2,005
Likes: 2
From: Battlecreek, MI / Mansfield, OH
don't even know where to start........ I'd have to say with the price of the car + everything else I have into it has to be atleast $30,000 if not closer to $35,000
Cost of car: $18,000
Parts on the car currently (I'm on my 2nd or even 3rd aftermarket part on alot of items):
BeCool Radiator
Torq Thrust II's (3rd set of rims on the car)
ported LS3 heads (had AFR 225's before the LS3's)
FAST 102/102 (had a fast 90/90 before the 102/102)
TSP 102mm MAF (had an slp maf before)
FTP 102mm Lid ( had an SLP lid before)
Kooks 1 7/8 headers ( had slp and tsp headers before)
kooks true duals ( had slp loud mouth, corsa, and magnaflow before)
MWC 9" rear ( had 3.73 and auburn dif installed in the 10 bolts before the MWC)
PST drive shaft ( had a spohn drive shaft before)
MWC long toque arm ( had an slp torque arm before)
MWC watts link
spohn rear LCA's
Monster stage 4 (3rd clutch dont remember what the 2 other ones where)
LS3 block with callies comp star crank/rods wiseco pistons
nearly every engine bolt is ARP
strano springs (had eibach pro kit before)
beilstein shocks
umi k-member
holley polished valve covers
hawk hps brake pads
power slot rotors
innovative wideband O2
hp tuners
b&m ripper shifter
steel 3/4 shift fork, bronze pads, billet keys
nasty fuel rails
ls3 injectors
fast fuel rail line kit
$500 in MBA covers
LMC clear headlights
racetronix fuel pump/hot wire
slp fan control
slp tcs logic module
poly motor mounts
inovative wiring big 3 mod
high output alternator
u.s. exotics superhawk hood
comp custom grind cam (2nd cam)
pearl white paint job
tick clutch master / speed bleeder
comp push rods
coyles timing set
ported oil pump
patriot valve springs with comp hardware
thats all i can come up with off the top of my head im sure there other little odds and ends.... you do the math.
the best part........ I paid my car off 2 months ago
She is 11 years old and has 70,000 miles (on the body pretty much) lol
Cost of car: $18,000
Parts on the car currently (I'm on my 2nd or even 3rd aftermarket part on alot of items):
BeCool Radiator
Torq Thrust II's (3rd set of rims on the car)
ported LS3 heads (had AFR 225's before the LS3's)
FAST 102/102 (had a fast 90/90 before the 102/102)
TSP 102mm MAF (had an slp maf before)
FTP 102mm Lid ( had an SLP lid before)
Kooks 1 7/8 headers ( had slp and tsp headers before)
kooks true duals ( had slp loud mouth, corsa, and magnaflow before)
MWC 9" rear ( had 3.73 and auburn dif installed in the 10 bolts before the MWC)
PST drive shaft ( had a spohn drive shaft before)
MWC long toque arm ( had an slp torque arm before)
MWC watts link
spohn rear LCA's
Monster stage 4 (3rd clutch dont remember what the 2 other ones where)
LS3 block with callies comp star crank/rods wiseco pistons
nearly every engine bolt is ARP
strano springs (had eibach pro kit before)
beilstein shocks
umi k-member
holley polished valve covers
hawk hps brake pads
power slot rotors
innovative wideband O2
hp tuners
b&m ripper shifter
steel 3/4 shift fork, bronze pads, billet keys
nasty fuel rails
ls3 injectors
fast fuel rail line kit
$500 in MBA covers
LMC clear headlights
racetronix fuel pump/hot wire
slp fan control
slp tcs logic module
poly motor mounts
inovative wiring big 3 mod
high output alternator
u.s. exotics superhawk hood
comp custom grind cam (2nd cam)
pearl white paint job
tick clutch master / speed bleeder
comp push rods
coyles timing set
ported oil pump
patriot valve springs with comp hardware
thats all i can come up with off the top of my head im sure there other little odds and ends.... you do the math.
the best part........ I paid my car off 2 months ago
She is 11 years old and has 70,000 miles (on the body pretty much) lol
Last edited by TransWS6Am; 04-24-2012 at 05:02 PM.
#120
$3250-car
$400-magnaflow catback
$300- bbk lt/ory
$500-tires
$150-lca/phb/stb
$1000-stock longblock
$400-gaskets and stuff
$1800-FLT lvl3 tranny
$800ish- yank ss3600/flexplate
$200 (rough estimate)- brakes,oil, little things
just over $8500
I should leave it alone once i get it running and tuned....sucks being a college student
$400-magnaflow catback
$300- bbk lt/ory
$500-tires
$150-lca/phb/stb
$1000-stock longblock
$400-gaskets and stuff
$1800-FLT lvl3 tranny
$800ish- yank ss3600/flexplate
$200 (rough estimate)- brakes,oil, little things
just over $8500
I should leave it alone once i get it running and tuned....sucks being a college student