View Poll Results: How much WHP is your car making?
200-300WHP
![](https://ls1tech.com/forums/images/polls/bar2-l.gif)
![](https://ls1tech.com/forums/images/polls/bar2.gif)
![](https://ls1tech.com/forums/images/polls/bar2-r.gif)
![](https://ls1tech.com/forums/clear.gif)
9
3.88%
300-350WHP
![](https://ls1tech.com/forums/images/polls/bar3-l.gif)
![](https://ls1tech.com/forums/images/polls/bar3.gif)
![](https://ls1tech.com/forums/images/polls/bar3-r.gif)
![](https://ls1tech.com/forums/clear.gif)
60
25.86%
350-400WHP
![](https://ls1tech.com/forums/images/polls/bar4-l.gif)
![](https://ls1tech.com/forums/images/polls/bar4.gif)
![](https://ls1tech.com/forums/images/polls/bar4-r.gif)
![](https://ls1tech.com/forums/clear.gif)
41
17.67%
400-450WHP
![](https://ls1tech.com/forums/images/polls/bar5-l.gif)
![](https://ls1tech.com/forums/images/polls/bar5.gif)
![](https://ls1tech.com/forums/images/polls/bar5-r.gif)
![](https://ls1tech.com/forums/clear.gif)
47
20.26%
450-500WHP
![](https://ls1tech.com/forums/images/polls/bar6-l.gif)
![](https://ls1tech.com/forums/images/polls/bar6.gif)
![](https://ls1tech.com/forums/images/polls/bar6-r.gif)
![](https://ls1tech.com/forums/clear.gif)
28
12.07%
500-550WHP
![](https://ls1tech.com/forums/images/polls/bar1-l.gif)
![](https://ls1tech.com/forums/images/polls/bar1.gif)
![](https://ls1tech.com/forums/images/polls/bar1-r.gif)
![](https://ls1tech.com/forums/clear.gif)
13
5.60%
550-600WHP
![](https://ls1tech.com/forums/images/polls/bar2-l.gif)
![](https://ls1tech.com/forums/images/polls/bar2.gif)
![](https://ls1tech.com/forums/images/polls/bar2-r.gif)
![](https://ls1tech.com/forums/clear.gif)
6
2.59%
600+WHP
![](https://ls1tech.com/forums/images/polls/bar3-l.gif)
![](https://ls1tech.com/forums/images/polls/bar3.gif)
![](https://ls1tech.com/forums/images/polls/bar3-r.gif)
![](https://ls1tech.com/forums/clear.gif)
28
12.07%
Voters: 232. You may not vote on this poll
How much WHP does your car have?
#62
Banned
Thread Starter
Join Date: May 2010
Location: Indiana
Posts: 953
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
![Werd](https://ls1tech.com/forums/images/smilies2/werd.gif)
My 00' pulled 340hp/350ft-lb with
-Lid
-P&P TB
-LS6 Intake
-Headers/Catted Y
-Cat Back
-Mail Order Tune
I usually trap high 113mph with no back seat, pass. seat, spare tire/jack and empty fuel tank with 159lbs driver
![Nod](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_nod.gif)
UD pulley and ORY would push me to over 350whp and a solid 114mph trap.
What were the specs on your mail ordered tune? I might be interested in tuning my car.
Also, how do you remove the back seat and passenger seat? How much weight do you save by doing this?
#64
TECH Fanatic
iTrader: (4)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
You can remove the back and passenger seat with a simple tool kit, just some sockets.
Between the passenger seat/ back seat/ spare tire and jack it's about 100lbs.
A full tank of gas (about 16 gallons) at 6.25lbs a gallon weighs about 100lbs as well. I was running a little over a gallon of fuel, maybe two so I saved 80lbs there.
Nearly 200lbs can shave off roughly .2 seconds in the quarter or add about 2mph to your trap, but that's all estimates and bench racing.
A lot of people don't understand how my bolt on car can trap 113 when they only trap 110-111mph. Well, many race with a full tank, full interior, and some guys weigh about 250lbs or more, I'm only 150lbs. That's about 300lbs heavier than what I run, that's a big chunk of weight that your car has to drag down the strip.
#65
Banned
Thread Starter
Join Date: May 2010
Location: Indiana
Posts: 953
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Tuned by "Frost" a well known member on this site. Very reputable tuner. You send him your PCM and a list of your mods and he tunes it for you.
You can remove the back and passenger seat with a simple tool kit, just some sockets.
Between the passenger seat/ back seat/ spare tire and jack it's about 100lbs.
A full tank of gas (about 16 gallons) at 6.25lbs a gallon weighs about 100lbs as well. I was running a little over a gallon of fuel, maybe two so I saved 80lbs there.
Nearly 200lbs can shave off roughly .2 seconds in the quarter or add about 2mph to your trap, but that's all estimates and bench racing.
A lot of people don't understand how my bolt on car can trap 113 when they only trap 110-111mph. Well, many race with a full tank, full interior, and some guys weigh about 250lbs or more, I'm only 150lbs. That's about 300lbs heavier than what I run, that's a big chunk of weight that your car has to drag down the strip.
You can remove the back and passenger seat with a simple tool kit, just some sockets.
Between the passenger seat/ back seat/ spare tire and jack it's about 100lbs.
A full tank of gas (about 16 gallons) at 6.25lbs a gallon weighs about 100lbs as well. I was running a little over a gallon of fuel, maybe two so I saved 80lbs there.
Nearly 200lbs can shave off roughly .2 seconds in the quarter or add about 2mph to your trap, but that's all estimates and bench racing.
A lot of people don't understand how my bolt on car can trap 113 when they only trap 110-111mph. Well, many race with a full tank, full interior, and some guys weigh about 250lbs or more, I'm only 150lbs. That's about 300lbs heavier than what I run, that's a big chunk of weight that your car has to drag down the strip.
Also was wondering, what's the first 1/4 mile time you got and what's the best 1/4 mile time you have?
I'm not too heavy myself, maybe 190.
Lastly, I hear if your car runs 13.99 or faster you need to wear a helmet? Do strips usually provide those, or do I have to get one of my own?
#66
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Can you put me in touch with Frost?
Also was wondering, what's the first 1/4 mile time you got and what's the best 1/4 mile time you have?
I'm not too heavy myself, maybe 190.
Lastly, I hear if your car runs 13.99 or faster you need to wear a helmet? Do strips usually provide those, or do I have to get one of my own?
Also was wondering, what's the first 1/4 mile time you got and what's the best 1/4 mile time you have?
I'm not too heavy myself, maybe 190.
Lastly, I hear if your car runs 13.99 or faster you need to wear a helmet? Do strips usually provide those, or do I have to get one of my own?
13.99 and faster requires a helmet at MOST tracks... I say most because I have been to a couple different tracks where I run mid-high twleves and no one ever said a thing about me not having my helmet. I dont know of any tracks that provide them, you will have to purchase your own.
#69
Banned
Thread Starter
Join Date: May 2010
Location: Indiana
Posts: 953
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Any idea on where I can buy one of these helmets and about what they run?
#70
9 Second Club
iTrader: (31)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have a Pyrotect helmet and love it.
http://www.pyrotect.com/home.php?cat=14
#74
TECH Apprentice
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
400 even on a dynojet. cam/boltons/mail order tune. Its trapped 116mph in the quarter and 90 in the eigth, killing the clutch the whole way
edit: above numbers are from when it was an m6. no dyno or track time since i swapped over to the th400 and still got to get it tuned for the bottle
edit: above numbers are from when it was an m6. no dyno or track time since i swapped over to the th400 and still got to get it tuned for the bottle
#76
Banned
iTrader: (1)
Join Date: Mar 2011
Location: Louisiana
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
475 RWHP 420 Torq. Infiniti G35 Coupe
LS2-LS6 CNC heads-231/236 Cam/25% underdrive pulley-1 7/8 headers-Borla Exhaust-42 lb fast injectors-monster clutch #2-tuned by Thunder racing. Mustang Dyno
Future- Fast 102 & TB.
LS2-LS6 CNC heads-231/236 Cam/25% underdrive pulley-1 7/8 headers-Borla Exhaust-42 lb fast injectors-monster clutch #2-tuned by Thunder racing. Mustang Dyno
Future- Fast 102 & TB.
#77
TECH Fanatic
iTrader: (4)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Also was wondering, what's the first 1/4 mile time you got and what's the best 1/4 mile time you have?
I'm not too heavy myself, maybe 190.
Lastly, I hear if your car runs 13.99 or faster you need to wear a helmet? Do strips usually provide those, or do I have to get one of my own?
I'm not too heavy myself, maybe 190.
Lastly, I hear if your car runs 13.99 or faster you need to wear a helmet? Do strips usually provide those, or do I have to get one of my own?
Then I got a 2.3 60ft 13.2 @ 113.8-114.1mph adding headers/catted-y/LS6 intake/tune.
Don't look at my time, look at my trap speed if you wanna see the diff. my mods made. I could add 50 more hp and not get a better quarter mile time. My street tires have reached their limit.
I got my helmet for $90 at summit racing.
#78
Banned
Thread Starter
Join Date: May 2010
Location: Indiana
Posts: 953
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I got 2.2 60ft 13.2 @ 111mph with a lid/catback.
Then I got a 2.3 60ft 13.2 @ 113.8-114.1mph adding headers/catted-y/LS6 intake/tune.
Don't look at my time, look at my trap speed if you wanna see the diff. my mods made. I could add 50 more hp and not get a better quarter mile time. My street tires have reached their limit.
I got my helmet for $90 at summit racing.
Then I got a 2.3 60ft 13.2 @ 113.8-114.1mph adding headers/catted-y/LS6 intake/tune.
Don't look at my time, look at my trap speed if you wanna see the diff. my mods made. I could add 50 more hp and not get a better quarter mile time. My street tires have reached their limit.
I got my helmet for $90 at summit racing.
Someone else was saying just about any motorcycle helmet will do?