98Zeric

I recently tore down my 99 t/a and rebuilt an engine. I also reloomed the wire harness. Got it all back together...minus the struts/shocks... now it will not crank over using the key. Fuel pump primes once the key is switched to the on position. Then nothing. No clicking any where.
before I go any farther in diagnosing can anyone tell me where this Ground bracket go! I remember a spade connector going to it during disassemble..but I am an idiot apparently cuz I can't remember where it was or what it is for

98Zeric

now with the key on all the idiot lights flash all and at the same time.

98Zeric

I figured out the no start issue.

VIP1

what was the issue?

98Zeric

I forgot to plug in the two connector behind the kick panel on passenger side 🤫☺ lol

VIP1

You forgot the BCM?

98Zeric

It happens

VIP1

Not judging, just confirming.

98Zeric

thanks for the clarification 👍

98Zeric

thanks for the clarification 👍