Stalled autos come on inside
#2
Old Drag Racer
iTrader: (5)
Join Date: Jul 2004
Location: Outer Banks of NC
Posts: 708
Likes: 0
Received 0 Likes
on
0 Posts
7.50's-7.60's in the 1/8th this Summer at ~90 MPH. If it's below 80 degrees low 7.50's. Above 90 degrees, low 7.60's. Hoping for some 7.30's or possibly even some 7.20's once I get the FAST 90/90 installed and take off about 300 pounds from my car this Fall. Nasty temps and humidity don't do your horsepower any favors.
#5
Originally Posted by Roarin_8
Lid, loudmouth, yank ss3800 and nitto drags 12.2 @ 111 with a 3505 raceweight (me included). My best 1/8th was a 7.78.
#6
TECH Regular
iTrader: (3)
Join Date: Sep 2005
Location: Its classified.
Posts: 450
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Roarin_8
Lid, loudmouth, yank ss3800 and nitto drags 12.2 @ 111 with a 3505 raceweight (me included). My best 1/8th was a 7.78.
The "WHOA ****" in your video says it all. I have 2 weeks till my cam and stall go it. Then I want a "WHOA ****".
Trending Topics
#10
TECH Resident
iTrader: (8)
Join Date: Dec 2001
Location: DFW
Posts: 905
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by AutomagicLS1
DAMN did you have alot of suspension? See this is why I went LS1 route. Know how much it would take to get a 2V mustang to run a 12 flat. ALOT of nitrous or boost!
#14
TECH Resident
iTrader: (8)
Join Date: Dec 2001
Location: DFW
Posts: 905
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Roarin_8
Ouch, nasty DA!! I found that launching at idle was worse than footbraking it. Try footbraking at 3500 and see how you like it.