View Poll Results: Power?
that thing looks stock!
![](https://ls1tech.com/forums/images/polls/bar2-l.gif)
![](https://ls1tech.com/forums/images/polls/bar2.gif)
![](https://ls1tech.com/forums/images/polls/bar2-r.gif)
![](https://ls1tech.com/forums/clear.gif)
0
0%
high 400's +
![](https://ls1tech.com/forums/images/polls/bar1-l.gif)
![](https://ls1tech.com/forums/images/polls/bar1.gif)
![](https://ls1tech.com/forums/images/polls/bar1-r.gif)
![](https://ls1tech.com/forums/clear.gif)
0
0%
Voters: 102. You may not vote on this poll
I need help settling a dispute. HP estimation
#41
10 Second Club
iTrader: (18)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
High 300s is my guess. I had an 01 TA a4 that layed down 363rwhp through the TCI 3500 verter with a 225/225 cam. At that time it was the highest cam only a4 car on that dyno (TEA while they were still in BG KY) Then there was another a4 car with the same stall and similar cam+heads that did in the 380 range. Based off this I'd say upper 300s is about right for the car in question.
#42
12 Second Club
Join Date: Jul 2006
Location: Pittsburgh,PA
Posts: 799
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
im gonna say high 300's...simply because i dont think it would break 400 (especially since its an a4) but i dont think you're LOW 300s or anything. i'd say 360-380ish as a rough guess. was it stock stall???? if it had a big stall, i'd say low 300's