Does anyone have a record of the original image files to see how it looks? I need to do this.

 

I figure this may help others. I used the posted template and had a metal shop make it for me out of 0.090 aluminum. It is sandwiched between two fender washers using 1/4 -20 3/4 bolts and regular nuts. Lower right I used smaller washers for clearance. Center hole wasn't big enough. I used a file the enlarge it slightly. I didnt overly tighten the nut. I used blue loctite. No movement when going up and down. Thank you op.

 

Can anyone sell me one made?

 

We have a new sticky in this forum, where the template for this plate is posted: https://ls1tech.com/forums/general-m...-home-fab.html

 

The linked sticky/thread doesn't appear to have any CAD files or templates attached.

 

I clicked on the link to the sticky and there were no CAD files or templates. In fact, it just circled back to this thread.

 

Click the "mediafire" link and you can download the PDF from there. When printing it, make sure to print it in "Actual Size" (8.5" x 11" paper) instead of "Fit" or "Shrink" so that the dimensions stay true.

 

Some guy named Chris sells the window plates.

 

Yes. It's in the very first post of the linked thread.

 

Here's the link. It's not that noticeable among the dead gallery pics. It is here: http://www.mediafire.com/?2htzbpbbwikbrva