T-top corner bulging
T-top corner bulging The corner of one of my t-tops is bulging up. I can't seem to get it down and don't want to ruin it trying. What needs to be done to get this to go down? Here's a picture of the location on the t-top where it's sticking up. This isn't my car & this car doesn't have the problem I'm describing.
Last edited by user 4556884458; Sep 13, 2011 at 12:37 PM.
The issue isn't actually shown in this picture. I just circled where it takes place on the t-top. It's the molding at the very corner of the t-top and it bulges out like it's separating. I'll try to get some pictures soon.
Attachment 729592
Here's a picture of what I'm talking about. I don't want to have to replace the t-top because it has my vin # engraved in it.
Here's a picture of what I'm talking about. I don't want to have to replace the t-top because it has my vin # engraved in it.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo You might try taking the plastic cover off and see if you can check for a bend in the skeleton of the top. (I've never taken one apart, myself. Maybe someone else can chime in.)