Cruise control dont work.
#4
TECH Resident
iTrader: (3)
Join Date: Sep 2007
Location: Holmes County (thats right Amish Country), OHIO
Posts: 896
Likes: 0
Received 1 Like
on
1 Post
Are you sure your opperating it correctly? I thought mine didn't work because I tried the same controls as my S10 however it seems they are just opposite. So one vehicle the one button speeds up and sets the cruise when the other coasts the car. I don't know. I was happy when i figured this out...
#5
TECH Addict
iTrader: (37)
Are you sure your opperating it correctly? I thought mine didn't work because I tried the same controls as my S10 however it seems they are just opposite. So one vehicle the one button speeds up and sets the cruise when the other coasts the car. I don't know. I was happy when i figured this out...
on my 00 now it works 75% of the time think somethings lose
#6
Banned
iTrader: (8)
Join Date: Jun 2007
Location: san fernando valley, california
Posts: 3,093
Likes: 0
Received 1 Like
on
1 Post
damm mine doesent work either! but i have a fuse on mine! hope you can figure this problem out! mine used to work but i do not know why it doesent work now! but my traction control seems to work fine but not the cruise control, i also remember throwing a few clutch pedel switch ses codes but im not to sure that would be the problem, i think it still works since when i try to start it without pressing the clutch it will not, so hopefully we will be able to figure this problem out!
Trending Topics
#14
There is a switch on the clutch pedal; its adjustable. The cruise will NOT work if the switch isn't engaged. The switch is engaged when the clutch pedal is up. For some reason the switch can loosen and then your cruise doesn't work. When I had my clutch done, a few weeks later I noticed my cruise wouldn't work; then I noticed the switch wasn't engaging all the way. Check it, I bet thats your problem.
#15
Banned
iTrader: (8)
Join Date: Jun 2007
Location: san fernando valley, california
Posts: 3,093
Likes: 0
Received 1 Like
on
1 Post
There is a switch on the clutch pedal; its adjustable. The cruise will NOT work if the switch isn't engaged. The switch is engaged when the clutch pedal is up. For some reason the switch can loosen and then your cruise doesn't work. When I had my clutch done, a few weeks later I noticed my cruise wouldn't work; then I noticed the switch wasn't engaging all the way. Check it, I bet thats your problem.
#16
You will see where there are threads. You can adjust it by turning it, kind of like adjustable suspension parts. Just adjust it until it is completely depressed when the clutch is engaged (pedal is not being depressed)
#17
Banned
iTrader: (8)
Join Date: Jun 2007
Location: san fernando valley, california
Posts: 3,093
Likes: 0
Received 1 Like
on
1 Post
well i looked at my pedel today, i noticed the one where it is on the bottom that it only gets pushed in when i press the clutch! is there another one on the upper side? i dident see any type of threads on it, it is like in one position, and is a rectangular shaped switch
#18
#19
Exhaust & Mufflers for Ws-6 Trans Am 2002
I am looking for great sounding muffler & exhaust system that will increase performance that is a direct fit for my 2002 TA you guys have any great ideas??? Thanks
www.jerrywhynot@yahoo.com
www.jerrywhynot@yahoo.com