Jmagliola

iTrader: (1)

Got it off ebay for cheap came boxed directly from Mag. didn't see this until the thing was put on and I took off the bubble wrap.....



I contacted the guy on ebay - he has like 47 other of the same exact system for sale, and says he stands behind his auctions 100% - however what do you think, do I have any other options if he comes back saying "it must have happened in shipping, sorry can't help ya" ??

nitr0racing21

iTrader: (5)

That doesnt look like it happened in shipping unless someone at UPS drop it off the top of the truck

zaner

iTrader: (16)

Wrap some tape around the ends of a pair of pliers to help from not scratching it and bend the tip back to its normal shape? It doesnt look bad at all IMO

nitr0racing21

iTrader: (5)

worth a shot

Jmagliola

iTrader: (1)

I'll try it lata tonight

Jmagliola

iTrader: (1)

you sure i can bend it back to normal?

Reject

iTrader: (24)

they make this tool at autozone that it's only function is to reround tail pipes. i think it's called a exhaust extractor or somthing like that. it's a tool in autozone that you put in and tighten up and it swells out to expand the pipe back into shape

Reject

iTrader: (24)

http://www.jcwhitney.com/MUFFLER-AND...7961_10101.jcw

it looks like that, you may try and see if they rent it out first

Jmagliola

iTrader: (1)

Cool I'll check that out if the guy doesn't offer to ship me a new one and pay for the old one to be shipped back.

TheSilverOne

iTrader: (22)

you got it off ebay....i doubt it

vader99

iTrader: (4)

Mine came like that back in 2000 as well. I just took a small piece of wood and hit it with a hammer inside the pipe to get most of the irregularity out and then some pliers finished the job off. It looked like factory after I was done.

Raise

iTrader: (31)

You might try to persuade it back to round. The only thing is, if you do that, it might void your chance of getting a direct replacement from Magnaflow

TUFAS4U

iTrader: (5)

dent the other tip to match????

Mike454SS

iTrader: (4)

I think you'll be able to fix that in no time at all.

fortmyerspolice

iTrader: (7)

put a rag on the tip, then bend it up with big set of pliers

will01

I got mine from magnaflow with a similar defect but much smaller, i just bent it back myself as i did not notice the problem until it was on the car.

Jmagliola

iTrader: (1)

I'll try to rebend haven't heard from the seller

Mikes96z

iTrader: (39)

Excellent advice.