I ordered some MSD wires from a sponsor and said I wanted the ones with the adjustable end at the plug. I got part # 32819 and they aren't adjustable. I thought I read awhile back that MSD has a version that angles away from the headers. Am I full it it? What is that part #?

 

I just got on their site and noticed I have the only part # for an LS1. Who makes the wires with plug ends that angle away from the header?

 

You just bend them whatever way you want to get them away from the primaries. I don't know what the part number was, but I did it and it worked for me.

 

OK. Mine don't seem to want to hold a shape very well....

So I was smoking something when I read about plug wires that angle? I can't get the search to work very well on this site.

 

The MSD wires I got from Chris (99BlancoSS) appear to be straight, but they will bend to whatever angle you need and they hold that angle well. Don't recall the part number, but Chris will know!

Russ

 

i will replace my sparks and wire soon where do i get this bendable wire ?

thanks

 

99BlancoSS on here has NGKplugs/MSDwires for like $66 a set IIRC. You won't beat that deal.

BTW my MSD's bent right out of the way and clear my header primaries nicely

 

^^ Thank you.
Just go to my website in the online store section and to the MSD section and you'll find them. they are the standard multi-angle MSD gray boot. You grab them about 1/3 the way down from the wire to bend them.
I pre-bend them for anyone asking so. My wires are guaranteed for life vs defects, no beats my deal on MSD and NGK