Jscotty

I'm redoing my whole exhaust (LMs, ORY, Dual Cutouts, and a new Muffler or Catback depending on what works).

I want to know if there is any quiet-*** muffler that I can swap out for the LM bullet? I don't care about breathability since I'll be running the cutouts open with the exception of starting the car late at night... and around the popo.

Any suggestions are welcomed.

Thanks!

ttranssam

iTrader: (10)

search magnamouth borlamouth

Jscotty

I might be asking in the wrong place. Who in their right mind whats a quiet F-body, right!?

I'll check out the magnamouth and borlamouth.

transambroli

iTrader: (4)

Yeah why on earth would you want a quiet f-body. When you say LMs, ORY, Dual Cutouts Im guessing you means LT's. I wouldnt call the magnamouth or the borlamouth quiet just quieter than the LM resonator. Youll probably want a real muffler and not a strait through design to quiet it down. Most folks would recommend a hooker or magnaflow catback.

Jscotty

Yes, LTs, just a typo.

I think I'll ahve to look at a whole new catback too. I just wanted to check and see if there was a cheaper option out there. Maybe I'll go through the Classifieds on here for someone selling their stock catback...

1999FirehawkLS1

iTrader: (21)

Its not a bullet style but my flow master pretty quite

SweetS10V8

iTrader: (4)

Loud F-bodies are like loud imports.... seriously it does get old, and Im a car guy.

Quiet and quick is the way to go. You get to have more fun without being noticed, and you arent crying out for attention...

Im doing my new exhaust with quiet mufflers, Flowmaster Big Block II (70series). Id much rather give up 5-10hp to be able to mess around when I want to and not wake the neighborhood when I come home at night.

Detoxx03

iTrader: (14)

Borla X-r1

Tony 2000

i feel ya man ive got dumps off the headers and its gettin so old id almost throw some old school glass packs on it

nemss1

borlamouth, dynomouth and magnamouth are simple replacements to the LM1 and LM2. now as for quiet and good flowing, check out the magnaflow or the hooker aerochamber catback. quieter while still having a nice, low rumber and scream at WOT

Smokin00WS6

iTrader: (4)

Detoxx, do you have any video's of your exhaust. Im just curious to hear the tone with the XR1. I got the LM1 and Im going to get ARH headers, And im trying to get a feel for an XR1 sound. I know you are cammed, so that is exactly what I want to hear.

Mike

will01

You guys think the magnaflow is quiet? I have one and it is pretty loud... Thinking about swapping it out but I can't find a good replacement with the finish quality of the magnaflow. SLP has a new one that is supposed to be pretty quite but the finish quality is not that good.

FireBird_Fr3ak

iTrader: (7)

Search youtube for "Detoxx"

Detoxx03

iTrader: (14)

On youtube under "Detoxx03"

Smokin00WS6

iTrader: (4)

Thanks guys!!

Ice78Transam

iTrader: (1)

Super Turbo muffler. SUUPER quiet. Either Dynomax or Jegs if u wanna save a couple bucks.

or, GASP!:

stock

Flaring Afro

i personally dont see why you wouldnt just add a muffler over buying a whole new catback. should be cheaper to get the muffler. and magnaflow is one of the quietist there is....

or you could put stock back on with cut out? not sure how it sounds though with headers.

Soul TKR

iTrader: (4)

I did this exact swap... it was way too loud with LT's + ORY + LM1

went from the LM1 to LM1 + Magnaflow

just chopped off the rear section of the LM keeping the bullet in the I-pipe... then welded in a magnaflow muffler... so i have both...

pics...

removed the rear section of the LM1




added in the Magnaflow... w/new tips



sound clip in sig...

more sound clips on youtube... just look up "soul tkr" videos...

Detoxx03

iTrader: (14)

Ur welcome

KirkEvil

iTrader: (36)

There is no such thing as a quiet LM setup with LTs, heres my borlamouth...

Borlamouth Stock manifolds
Borlamouth w/cats
Borlamouth ORY