Installed headers - some problems and questions
Finally, when the car is cruising in 6th gear (around 55-65mph) with the cruise on, the car really seems to run rough. It's hard to explain what it is doing. The best description I can think of is every couple seconds it seems like the engine "jerks". Like the car just wants to stop running for a split second. This problem gets a little better when I put it in 5th when running under 75mph. It also seems to have this "jerking" problem when I really get on it.
It almost seems like the car isn't accelerating like it should when I gun it but it seems to be significantly faster than when it was stock.
The car idles better than it ever has before (no shaking at all, very smooth) and I don't hear anything that would indicate an exhaust leak (pinging, tinging, etc...). Is this all fairly normal stuff when you change headers before you get a tune? Will a tune fix all of this?
It should be noted that I changed my plugs and wires and took off all the coil packs and passenger side valve cover to get the headers in. I am all but certain that I put everything back together correctly. And it would be pretty obvious if I got my coil packs installed in the wrong order or if a spark plug wire wasn't hooked in wouldn't it?
Also, the mac y-pipe has spots for rear 02 sensors. I was able to retrieve one stock sensor and put it in, but the one on the drivers side was completed rusted in the stock y. I'm planning on getting some sort of plug to plug the hole but was wondering what size of plug to get.
Thanks for the help guys!
edit: oh yeah, I also installed my LS6 intake. Everything seemed to go pretty smooth with that as well. EGR and AIR have also been removed.
Like he said, double checking is always a free idea, therefor the best.
my .02
Trending Topics
The Best V8 Stories One Small Block at Time






