Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

Lowered, LTs, and TDs. any pics?

Thread Tools
 
Search this Thread
 
Old 10-14-2009 | 02:37 PM
  #21  
6.0 silverado's Avatar
On The Tree

iTrader: (2)
 
Joined: Sep 2009
Posts: 182
Likes: 3
Default

Originally Posted by 89BluIrocZ
anybody got pics of one up on a lift?
look in the true dual sticky. There are tons of pics.
Old 10-16-2009 | 09:44 PM
  #22  
integraxtc's Avatar
TECH Resident
iTrader: (11)
 
Joined: Jun 2007
Posts: 790
Likes: 0
From: Chicago, northside
Default

This is an lt1, up on a lift. But I am not dropped.

















Oh, ground pics. Again stock height.










I only scrape on sharp declines, especially if I have a passenger in the back.
I cannot drive w/ 2 passengers in the back, because it's major scrappage.

Those nasty narrow bolt down speed humps, I don't scrape on, but I got through them very slowly and at an angle.

I will be lowering the car though, may God bless my exhaust. LOL.

If it's real bad, I'll take it to the shop and have them try to gain some height, if that doesn't work I may go to a Ypipe, or just raise the car, I'll be on Ground Control coilover sleeves and Koni shocks.
Old 10-17-2009 | 01:58 AM
  #23  
02sslayer's Avatar
TECH Enthusiast
iTrader: (4)
 
Joined: Aug 2009
Posts: 651
Likes: 0
From: longview, wa
Default

i have tds with sweet thunder muffs im at stock hieght and its no problem. but here is the problem i really wana lower my car but im too scared to. the trick is to run both pipes up next to the driveline, i have seen that setup alot and im gonna have a guy build me one this winter. i am positive that is the only way to do it
Old 10-17-2009 | 10:21 AM
  #24  
Parasoth's Avatar
On The Tree

iTrader: (1)
 
Joined: Mar 2009
Posts: 168
Likes: 0
From: 918
Default

S-t-i-c-k-y.

https://ls1tech.com/forums/generatio...-pics-too.html




All times are GMT -5. The time now is 12:11 AM.