Help with new parts
Help with new parts Fellas i just won a set of 243/799 heads from a 2007 Vette with 5k on them. What parts should i replace while installing the heads? Also a set of long tubes are going on with the heads as well as new plugs/wires. What kind of gains can i expect along with a tune?
What do u mean what parts should u replace? Take old head off put new heads on. Get new head gaskets, MLS work just fine.
If you are talking about upgrading parts, then get dual springs.
If you are talking about upgrading parts, then get dual springs.
I would go ahead and put new lifters in while your there. I wouldnt worry with springs until you get a cam. Your stockers will be just fine until then. MLS gaskets I do agree with.
Are the lifters and push rods easily accessible while the heads are off? I plan on keeping the springs for a whle considering they are low mileage and i wont be doing a cam swap anytime soon.
The pushrods will come out prior to removing the head. Whats the mileage on your car? I shoulda asked that earlier. The lifters will be accessible after removing the heads.
Trending Topics
I have 144,XXX miles on my cars. I am the 2nd owner, first was a female. All service records for the day she rolled off the assmbley line. Synthetic oil from day on changed every 3000 mile.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
