Pace Setter Y Pipe before/after modification...
01-12-2004, 10:38 PM
#21
Originally Posted by John02SS
That will work Mike. I'm staying up and waiting! 
Wife is already asleep so what else is there to do besides look for ways to spend money on the car.
John
Wife is already asleep so what else is there to do besides look for ways to spend money on the car. John
01-13-2004, 12:36 AM
#23
10 Second Club
iTrader: (47)
Join Date: Nov 2001
Location: Pace, FL
Posts: 1,453
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the pics! I'm ordering the parts in tomorrow (today I guess ) and I'll post some pics of the Hooker y pipe after the install. Going with a 3.5 inch cutout and then reducing down to go into the catback. Should flow very well with the cutout open!
) and I'll post some pics of the Hooker y pipe after the install. Going with a 3.5 inch cutout and then reducing down to go into the catback. Should flow very well with the cutout open!
01-13-2004, 04:54 AM
#24
TECH Fanatic
iTrader: (1)
Join Date: Aug 2002
Location: Dallas, TX
Posts: 1,733
Likes: 0
Received 0 Likes
on
0 Posts
awesome job larry.. this is Kirk i bought the other set of pacesetter long tubes from ya.. car sounds great now. i need to attempt this y-pipe mod.. seems like it will flow alot better
oh and i did the cutout.. but decided to do 1 after the y-pipe merge.. so that i can put a high flow cat on each side of the y-pipe later on to make it somewhat legal
oh and i did the cutout.. but decided to do 1 after the y-pipe merge.. so that i can put a high flow cat on each side of the y-pipe later on to make it somewhat legal
01-13-2004, 06:56 AM
#25
TECH Addict
Thread Starter
iTrader: (4)
Join Date: Nov 2001
Location: Sugar Land, TX
Posts: 2,485
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jrp
mines not crushed. its a custom Y from scratch, and i have jet hots.
http://ourworld.cs.com/jrpws6/parts/DSC00208.JPG
http://ourworld.cs.com/jrpws6/parts/DSC00208.JPG
Mike (MM98),
Where's your pics?
01-13-2004, 01:30 PM
#27
TECH Addict
Thread Starter
iTrader: (4)
Join Date: Nov 2001
Location: Sugar Land, TX
Posts: 2,485
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by MM98
Larry, they're on the 2nd post of this page(attachments)..
Mike.
Mike.
Yours looks very similar to mine except you have your tucked up better then I got mine. I already had the tail pipes set so had to drop it a little more than you losing a little ground clearance. I also have a cutout just after of the 3 1/2" collector.
Kirk,
Glad you got your headers installed.
I think a heads and cam car will need this collector mod. On a stock heads/cam engine I'm not sure you will run any better.
01-13-2004, 01:48 PM
#28
Yeah we had to make sure that the y-collector would fit above the safety loop.. I got my exhaust bumped before the rear fascia so making sure the tips were ok wasn't a problem.. It does look like a tght fit but I 've got no banging issues as of now.
Mike.
Mike.
01-13-2004, 02:16 PM
#29
Originally Posted by foff667
after going back and forth with you about their ypipe id have to agree yours sucks and i think i wouldve thrown a chair against a wall if i got that lol sorry man heres a pic of mine inside.
lata
Bill
lata
Bill
