FAST Intakes @ Thunder Racing...THEY'RE HERE!
#81
I can shift faster than you.
iTrader: (21)
Join Date: Nov 2001
Location: Baton Rouge, LA
Posts: 5,133
Likes: 0
Received 0 Likes
on
0 Posts
We had no problems with the seal. Everything bolted up just fine. The only modification I had to make was to bend the LS6 coolant crossover tube on the front of the cylinder heads down some. It was just slightly touching the intake and preventing it from sitting flush with the cyl. head. 5 seconds with a little prybar was all it took.
#84
TECH Resident
Join Date: Apr 2003
Location: Tulsa, Ok
Posts: 791
Likes: 0
Received 0 Likes
on
0 Posts
these are some promising initial results. i hope with the big tb's that they will really start to shine. especially on motors that like to rev. great work thunder
#88
TECH Regular
Join Date: Nov 2001
Location: Plano, TX
Posts: 415
Likes: 0
Received 0 Likes
on
0 Posts
damn the gains don't look too bad. But the 7hp one is a little disapointing. Was this one with tuning? I would be interested to see the gains before and after tuning.
#89
TECH Fanatic
Join Date: Mar 2002
Location: Your Reality Check Bounced...
Posts: 1,421
Likes: 0
Received 0 Likes
on
0 Posts
A lil bit of Jumpin to conclusions maybe??!!
Guys come on...the intake has been out for what...24hrs..if that...noone has everthing figured out...I mean going from an LS1 to LS6 intake on a H/C car was a HUGE difference...but that was with porting the TB, and Z06 Maf included...doubt I'd have gotten 20+hp w/out that...most of these tuners are just unbolting one intake and strapping the other on...let them get the bigger TB versions and let them test several different combo's...
I mean 13rwhp on a 346 over an LS6 intake w/a TB that ISN'T the restriction is believable.....then 7hp over a 427 when the TB is already being maxed out.....it's totally believable...
Come on MTI, Come on AS, Ligenfelter...they'll all get their chance and hell they've already shown that no matter the engine you're getting a gain...it's not a failed design....hell for 13more hp would've put me close to 450 w/my MTI H/C set up...I sure would've ponied up another 300 on my H/C set up to reach that mark and have an intake that would've supported my forged 360 I was saving up for.
I mean 13rwhp on a 346 over an LS6 intake w/a TB that ISN'T the restriction is believable.....then 7hp over a 427 when the TB is already being maxed out.....it's totally believable...
Come on MTI, Come on AS, Ligenfelter...they'll all get their chance and hell they've already shown that no matter the engine you're getting a gain...it's not a failed design....hell for 13more hp would've put me close to 450 w/my MTI H/C set up...I sure would've ponied up another 300 on my H/C set up to reach that mark and have an intake that would've supported my forged 360 I was saving up for.
#90
Banned
Thread Starter
iTrader: (4)
Join Date: Nov 2001
Location: Baton Rouge, LA
Posts: 1,005
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by pewter99SS
damn the gains don't look too bad. But the 7hp one is a little disapointing. Was this one with tuning? I would be interested to see the gains before and after tuning.
The same intake is now on a 2000 stock-motored car and we'll have dyno results shortly.
Angie
#94
TECH Junkie
Join Date: Dec 2001
Location: Lakeland, FL
Posts: 3,242
Likes: 0
Received 0 Likes
on
0 Posts
these are promising results so far, In both cases it did outperform the ls6 intake which is promising. Very nice, Thanks for dyno'ing so quickly all you guys at Thunder.
#99
9 Second Club
Join Date: Nov 2001
Location: Bay Area, CA
Posts: 1,445
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by glhs379
Thunder says 13 wheel on a stock head 346, MTI says 7 wheel on a 427?
Something is not right here? Do both companies sell these intakes, I would like to see some unbiased back to back numbers.
Also, if the fast intake introduces more air into the car for the stated hp increases, wouldn't one think that the a/f ration would change(leaner) if no changes were made between runs?
Something is not right here? Do both companies sell these intakes, I would like to see some unbiased back to back numbers.
Also, if the fast intake introduces more air into the car for the stated hp increases, wouldn't one think that the a/f ration would change(leaner) if no changes were made between runs?