SLP powerflo vs. Magnaflow videos?
07-07-2010, 06:57 PM
#1
TECH Apprentice
Thread Starter
iTrader: (4)
Join Date: Dec 2005
Location: Garden City, Kansas
Posts: 395
Likes: 0
Received 0 Likes
on
0 Posts
SLP powerflo vs. Magnaflow videos? Alright I think a narrowed it down now between these two cat backs. I am wanting to see some videos of a HCI car with one of these systems. I have been searching day after day and its hard to find a full exhaust HCI car vid with one of these systems. Ive looked on youtube and ls1sounds but lets face it, ls1 sounds is getting out dated and I'm tired of waiting 5 mins to see if a video will upload or not.
My current setup is in my sig and it is just way too loud and raspy with a stall converter. The other night I had my buddy drive it and I followed in his stock TA just to hear my car and it sounds bad ***, until you get about 2k rpm then it starts crackling and popping and it just sounds like ****! Not to mention I get too much attention. Now I don't want it to be so quiet its stock, in fact I don't care that its loud, its just the fact that it starts cackling and popping and sounds like **** above 2k rpm. I just want a nice deep muscley tone(yeah I said muscley).
I have stainless steel OBX headers one the way with a catted Y-pipe but I don't think the cats in this Y will help much b/c I went with the cheaper cats. I would like to replace everything so my full exhaust is stainless steel.
So if you have a HCI car, or even just cammed, with one of these two exhaust systems please post up your videos! Id like to see idling, revving, and drive-bys at WOT if at all possible.
I would also like to have input on personal experiences with either of these two systems if you have them.
Here is my car racing at a car show against a stock TA so the only car you can here is mine:
http://www.youtube.com/watch?v=9CoIy988JIQ
Here is a video of my car at idle with revs:
http://www.youtube.com/watch?v=6Il5wHWDv2c
Thanks!
My current setup is in my sig and it is just way too loud and raspy with a stall converter. The other night I had my buddy drive it and I followed in his stock TA just to hear my car and it sounds bad ***, until you get about 2k rpm then it starts crackling and popping and it just sounds like ****! Not to mention I get too much attention. Now I don't want it to be so quiet its stock, in fact I don't care that its loud, its just the fact that it starts cackling and popping and sounds like **** above 2k rpm. I just want a nice deep muscley tone(yeah I said muscley).
I have stainless steel OBX headers one the way with a catted Y-pipe but I don't think the cats in this Y will help much b/c I went with the cheaper cats. I would like to replace everything so my full exhaust is stainless steel.
So if you have a HCI car, or even just cammed, with one of these two exhaust systems please post up your videos! Id like to see idling, revving, and drive-bys at WOT if at all possible.
I would also like to have input on personal experiences with either of these two systems if you have them.
Here is my car racing at a car show against a stock TA so the only car you can here is mine:
http://www.youtube.com/watch?v=9CoIy988JIQ
Here is a video of my car at idle with revs:
http://www.youtube.com/watch?v=6Il5wHWDv2c
Thanks!
07-07-2010, 07:11 PM
#4
TECH Apprentice
Thread Starter
iTrader: (4)
Join Date: Dec 2005
Location: Garden City, Kansas
Posts: 395
Likes: 0
Received 0 Likes
on
0 Posts
haha its all good. But like i said I dont know if those cats will help much. My headers will be here friday so I am wanting to put them on with my current cat back to see how or if that catted why will change the sound at all.
Of corse no camera can make a car sound just like it will in real life but you can at least get a idea of the kind of rasp it makes. I love the way my car sounds at idle and below 2 grand rpm but above it just sounds like **** and cheap. Which it was cheap lol I just want a deeper tone.
Of corse no camera can make a car sound just like it will in real life but you can at least get a idea of the kind of rasp it makes. I love the way my car sounds at idle and below 2 grand rpm but above it just sounds like **** and cheap. Which it was cheap lol I just want a deeper tone.
Trending Topics
07-08-2010, 08:57 PM
#9
Staging Lane
iTrader: (13)
Join Date: Sep 2008
Location: Albuquerque,NM
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
I dont have vids man, but on mine its a full 3" stainless with an X pipe thru two 3in/out magnaflows. I sounds very nice, a bit quiet but enough to feel the cam thumping. At WOT its way louder and has a bit of a corvetteish sound to it.
hope this helps ill try to get vids.
hope this helps ill try to get vids.
07-08-2010, 11:37 PM
#10
TECH Apprentice
Thread Starter
iTrader: (4)
Join Date: Dec 2005
Location: Garden City, Kansas
Posts: 395
Likes: 0
Received 0 Likes
on
0 Posts
sounds good man! thanks for the vid!
I know you have tons of videos already but is there any chance I chould get you to do one with drive bys and reving through the whole system? Cut out closed since I wont have a cut out on mine?
Also how was the fitment? I have a friend that said he put it on a SS for a guy and he couldn't get it to fit worth a ****. maybe just a bad kit idk
nice! I'll look forward to hearing it!
I know you have tons of videos already but is there any chance I chould get you to do one with drive bys and reving through the whole system? Cut out closed since I wont have a cut out on mine?
Also how was the fitment? I have a friend that said he put it on a SS for a guy and he couldn't get it to fit worth a ****. maybe just a bad kit idk
I dont have vids man, but on mine its a full 3" stainless with an X pipe thru two 3in/out magnaflows. I sounds very nice, a bit quiet but enough to feel the cam thumping. At WOT its way louder and has a bit of a corvetteish sound to it.
hope this helps ill try to get vids.
hope this helps ill try to get vids.
Last edited by coxta; 07-08-2010 at 11:43 PM.
07-08-2010, 11:40 PM
#11
TECH Fanatic
iTrader: (2)
Join Date: Feb 2005
Location: Lee County, VA
Posts: 1,080
Likes: 0
Received 0 Likes
on
0 Posts
no magnaflow...i have it and hate it...people who say it screams at WOT must just be old or something cause mine gets no louder after bout 2.5K with LT's/ORY....and it has a TON of rasp...
07-09-2010, 02:06 AM
#13
I know you have tons of videos already but is there any chance I chould get you to do one with drive bys and reving through the whole system? Cut out closed since I wont have a cut out on mine?
Also how was the fitment? I have a friend that said he put it on a SS for a guy and he couldn't get it to fit worth a ****. maybe just a bad kit idk
Also how was the fitment? I have a friend that said he put it on a SS for a guy and he couldn't get it to fit worth a ****. maybe just a bad kit idk
http://www.youtube.com/watch?v=pBel5TeDdDs
07-09-2010, 07:10 AM
#14
TECH Apprentice
Thread Starter
iTrader: (4)
Join Date: Dec 2005
Location: Garden City, Kansas
Posts: 395
Likes: 0
Received 0 Likes
on
0 Posts
yeah ive seen this one and it sounds good! I just want to see how it sounds at WOT under a load. Hopefully you can get one before monday! Thanks a ton!
