people w/ e-cutouts what switch r u using?
#21
and by the way, anyone saying they cant find simple little switches? are you for real?
30 seconds searching....
http://www.mcmaster.com/#electrical-controls/=919vkr
30 seconds searching....
http://www.mcmaster.com/#electrical-controls/=919vkr
This is my current setup, the far right is for the cutout. I'd like to find a round dpdt rocker switch to match the other 2 I have. Ive spent some time looking for one and only come up with spdt round rocker switches.
#23
http://www.nitrousoutlet.com/catalog...272§ion=82
#24
#25
I think it's this same switch; it's used for the bottle opener, so i'm assuming it's a dpdt...
http://www.nitrousoutlet.com/catalog...272§ion=82
http://www.nitrousoutlet.com/catalog...272§ion=82
#27
#29
Mine has a wireless key fob system. The receiver is under the passenger seat. I considered running a manual switch but just stayed with the wireless system it came with. I didn't think it would work that well but I was very impressed. I know I can close it from my front door which is a nice ways from the car.
#30
I use the one that came with the McCord. But Digi-Key
has a whole mess of suitable switches. You need a DPDT
momentary center-off type and I'd look for at least a
5A rating just for luck.
https://ls1tech.com/forums/generatio...-approach.html
has a whole mess of suitable switches. You need a DPDT
momentary center-off type and I'd look for at least a
5A rating just for luck.
https://ls1tech.com/forums/generatio...-approach.html
#31
Thread Starter
Joined: Apr 2007
Posts: 9,501
Likes: 918
From: Evansville,IN
I have decided to go with the DHM because its adjustable and I can rotate it so it doesn't hang down. I am selling my 4 in QTP e-cutout if anyone is interested shoot me a PM.