HELP: what lid and MAF???
11-06-2010, 10:38 PM
#41
is this it??????? Caspers LS1 MAF to 3800 MAF Pigtail
http://speed-eng.com/store/caspers-l...l-p-10298.html
http://speed-eng.com/store/caspers-l...l-p-10298.html
11-07-2010, 08:17 AM
#42
12 Second Club
iTrader: (10)
Join Date: Jan 2009
Location: 5.0
Posts: 1,302
Likes: 0
Received 0 Likes
on
0 Posts
This is what you want bro, http://www.hawksthirdgenparts.com/ad...readapter.aspx
Damn now that's what I'm talking about! Great results from simple add ons.. I bet your throttle response improved as well
Damn now that's what I'm talking about! Great results from simple add ons.. I bet your throttle response improved as well
Here is the whole story. Andrew at CSP confirmed my thoughts on the 85mm MAF as he sees about 8hp average gains on cars he does. HP/$ this is a great mod. Even without the screen he nailed the tune its butter smooth.
https://ls1tech.com/forums/dynamomet...l#post14089188
Last edited by disc0monkey; 11-07-2010 at 01:26 PM.
11-07-2010, 08:48 AM
#44
12 Second Club
iTrader: (10)
Join Date: Jan 2009
Location: 5.0
Posts: 1,302
Likes: 0
Received 0 Likes
on
0 Posts
3.5" 89mm 3-Ply Silicone Coupler Hose Intake Turbo Pipe
$9 just kiss the MAF to the lid they are both the same ID. trimmed around the IAT.
The way I look at it this MAF was used on every LS engine at that time but our cars, most likely because they didn't want to spend money redesigning the lid. Andrew at CSP brought up a good point that the MAFs are getting older and dirtier and doesn't hurt to freshen it up with this cheap, readily available MAF.
11-07-2010, 10:59 AM
#48
12 Second Club
iTrader: (10)
Join Date: Jan 2009
Location: 5.0
Posts: 1,302
Likes: 0
Received 0 Likes
on
0 Posts
idk mines with out a screen and its smooth as butter but my tuner is good. if you have a massive cam with cam surge you may need the screen for added low engine speed stability. i have no issues, the screen was a big enough restriction that GM took it out of 02+ Z06s.
11-07-2010, 11:18 AM
#49
On The Tree
Thread Starter
iTrader: (3)
Join Date: Mar 2010
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
idk mines with out a screen and its smooth as butter but my tuner is good. if you have a massive cam with cam surge you may need the screen for added low engine speed stability. i have no issues, the screen was a big enough restriction that GM took it out of 02+ Z06s.
