Drumroll please.....NOT
Drumroll please.....NOT Ok, I have taken the car to a shop and they said the exhaust is just too big to fit under the car the right way *sigh* How can I tell where the Y is banging on the car? I looked under at idle but it only happens when i am driving, and i am going insane because of it! What remedy's have you guys found?
-Steve
-Steve
General rule of thumb is....you need about about 1/2" of clearance between the exhaust and the frame. Slide your finger over the top of the exhaust pipe...if there is a place where your finger stops...that is a good place to start looking for clearance problems. I would say the most likely spot is the drivers side of the y-pipe.
TECH Resident
Joined: Apr 2003
Posts: 791
Likes: 0
From: Tulsa, Ok
i'd try the poly motor mounts. they keep the engine really still. i only put one on the drivers side and my motor hardly bounces at all anymore. it used to bounce all over the place and my x-pipe would hit. now, nada. i also did not get any noticable vibrations from it.
here's a thread on it:
https://ls1tech.com/forums/showthrea...t=motor+mounts
here's a thread on it:
https://ls1tech.com/forums/showthrea...t=motor+mounts
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
