Fast intake install help!
09-15-2011, 02:10 AM
#1
Restricted User
Thread Starter
iTrader: (12)
Join Date: Feb 2010
Location: kansas
Posts: 1,794
Likes: 0
Received 0 Likes
on
0 Posts
Fast intake install help! So I started putting on my fast intake for some reason thinking I didn't need the new coolants lines. I thought it was only needed for the ls6.... Anyways I get it all ready to bolt down and it is not even close to fitting. So my question is. I need to get the coolant tube conversion kit. And do I need new valley cover bolts? I read somewher that the stock valley cover bolts will hit on the bottom of the intake. Help plz!
09-15-2011, 03:22 AM
#2
Restricted User
Thread Starter
iTrader: (12)
Join Date: Feb 2010
Location: kansas
Posts: 1,794
Likes: 0
Received 0 Likes
on
0 Posts
Mainly my question is what all do I need for the install of the newer coolant pipes? and I do need new bolt's or atleast do a little shaving to the stock bolts?
09-15-2011, 04:02 AM
#3
Restricted User
Thread Starter
iTrader: (12)
Join Date: Feb 2010
Location: kansas
Posts: 1,794
Likes: 0
Received 0 Likes
on
0 Posts
Also if anybody has some extra coolant lines for the conversion that lives in southwest ks, amarrillo, wichita, ok city, or anywhere around any of those places please let me know.
09-15-2011, 08:04 AM
#4
Staging Lane
iTrader: (11)
Join Date: Sep 2010
Location: Houston
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
12568478 (x1)
12562788 (x2)
and i believe you need to either shave the bolts or get different ones for the FAST setup.
12562788 (x2)
and i believe you need to either shave the bolts or get different ones for the FAST setup.
Last edited by _max_POWER; 09-15-2011 at 08:12 AM.
Trending Topics
09-15-2011, 10:34 PM
#8
Restricted User
Thread Starter
iTrader: (12)
Join Date: Feb 2010
Location: kansas
Posts: 1,794
Likes: 0
Received 0 Likes
on
0 Posts
Ha I shaved my bolts down and cut and welded my coolant lines shut. Just as good as the aftermarket and I saved myself $70. Pretty simple to do really. Had friends with a shop and a guy whos real good at welding help me out though.
