need advice for headers
#1
On The Tree
Thread Starter
Join Date: Dec 2011
Location: central valley ca
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
need advice for headers
Well I decided to go with kooks headers heard they were one of the best for my ls1 but now I'm stuck with the 1 3/4 or the 1 7/8 for my WS6 I dnt knw if its wrth thr extra cash for the 1 7/8 is even worth it the extra cash keep in mind I do plan to swap to the 6.0 LQ9 set ip whenever my 5.7 gives up so any advice guys
#2
TECH Fanatic
Well, 1 3/4's have been said to be sufficient at some pretty decent power levels, so I wouldn't hesitate to get a set if I was getting a good deal then swap them out later if they became a restriction for whatever reason. However, since you plan to go bigger cubes eventually with an LQ9 I would probably do the 1 7/8's, since those give you more room to grow anyways.
#7
TECH Enthusiast
iTrader: (5)
I just ordered 1 7/8 headers today to replace my 1 3/4. I wish the 1 7/8 headers headers were out when I got my 1 3/4", I wouldn't be having to buy them twice.
With 1 7/8" headers, you will have room to always grow. If you are like most of us on here, we are always questing for more power as the new found power always wears off.
With 1 7/8" headers, you will have room to always grow. If you are like most of us on here, we are always questing for more power as the new found power always wears off.
Trending Topics
#9
TECH Fanatic
I really am not sure if you will see gains with the 1 7/8's compared to the 1 3/4 headers initially. But, where the 1 7/8's generally may outshine the 1 3/4's is when you really start making big power, I'm talking 500+rwhp. So, in a way it may be kind of worth it at the end of the day to spend the extra money on the 1 7/8's, as previously stated, it just gives you a little more room to grow.