help with intake setup
#21
TECH Fanatic
iTrader: (18)
#22
TECH Apprentice
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
is this fuel pump kit okay they say its good for 600 hp and 700 torque. it racetronics.
http://www.ws6project.com/user_stor/...x-fuel-system/
should i get the ground upgrade and booster. what does the booster actually do.
http://www.ws6project.com/user_stor/...x-fuel-system/
should i get the ground upgrade and booster. what does the booster actually do.
#23
TECH Fanatic
iTrader: (18)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The boost interface is for something like the Kenne Bell Boost-a-Pump or the EZ Fuel Pump Booster. They crank the voltage up to fuel pump to boost output. You will be find with just the pump and harness, it will hold more than what you will be throwing at it. Although they won't hold 600hp and 700tq without a Boost-a-Pump. You'll get enough to support around 550-600 from just the harness and pump. Assuming your injectors are up to snuff.
Last edited by My6speedZ; 07-13-2012 at 10:06 PM.
#24
TECH Apprentice
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I got brand new racetronics 42lb injectors. Should I just get the booster it's not much more.
Is that the best fuel pump for in tank. Is is there any better versions of it. The racetronics is direct fit to. So I gess no cutting or crimping.
Is that the best fuel pump for in tank. Is is there any better versions of it. The racetronics is direct fit to. So I gess no cutting or crimping.