Travose21

iTrader: (22)

my injectors wont seem to fit down the intake injector ports. someone please chime in

Undertow74

iTrader: (45)

If they are not the skinny pencil style injectors, but the fatter SVO injectors, you will need to trim around the topside of the injector port to get them to fit right

Travose21

iTrader: (22)

so i dont need to buy a new set of injectors right.

Undertow74

iTrader: (45)

you shouldn't have to, i have the pencil style injectors on mine and they fit no problem. from what i have seen with the fatter injectors you have to trim the top edge around the injector boss where the upper shell meets the lower to get them to fit correctly

parks450

iTrader: (17)

Do not trim the intake, you need o-ring adaptors, I have has to buy them. Call fuel injector connection (FCI) and they will hook you up

raysadude

iTrader: (11)

I trim the upper edge with mine, there's plenty material there don't worry about trimming.

raysadude

iTrader: (11)

Oh I have the fat fast injectors

Travose21

iTrader: (22)

me to i have the fat short fast 42lb injectors

SweetS10V8

iTrader: (4)

Id buy injectors that are actually designed to work with the intake. Not modify the intake to fit injectors it wasnt designed to be used with.

raysadude

iTrader: (11)

I agree if you got the means then buy ls2 injectors that the intake is designed for

Travose21

iTrader: (22)

I ordered the long style 42lb injectors thanks guys

badazz81z28

iTrader: (6)

Is that not OK? Thats how my LS1 injectors fit in the 102 intake....I'm using LS1 injectors w/FAST provided O-rings for such injectors.

Travose21

iTrader: (22)

i was told that its not

badazz81z28

iTrader: (6)

From who? I would call FAST and ask....


Mine looks just like that, and CPG said I can use my stock LS1 injectors as long as I use their O-rings...

Travose21

iTrader: (22)

these are the ones i took out

badazz81z28

iTrader: (6)

Did you call Comp Perf Group? (FAST)?

Travose21

iTrader: (22)

yes and they said that mine would work but it wont run to the best performance because its not getting all the fuel to the valves and is too far back

badazz81z28

iTrader: (6)

Who did you talk to? Its an FI system...Fuel is sprayed into the runner, not the valve. There are tons of people not running the pencil tip LS2/LS3 injectors with this intake w/no issues.