so i bought a fast 102 intake n tb . i was told that the fast rails lift up and have issues .
has any one here had any issues with fast fuel rails?
if your using a fast 102 what rails are you using?

 

I have the fast 102 with the fast fuel rails and have no issues.

 

i had issues with my drivers side Rail. The shitty little metal stanchions that they come with are not worth a damn. my front 2 injectors were leaking from under the rail. I had to use a couple small washers under the rear rail mount to shim it up to let the front go down more so the injectors would seat properly.

 

I've have yet to run into this issue yet when installing the Fast 102 intakes and fast rails.

 

@ Aaron--
Well must have been just my luck. This is the same Fast 102 that got a magical crack in the back passenger side by one of the injectors and i had a bad vacuum Leak. I sent pictures to Comp Cams and they couldn't explain it, so i shipped the intake to them and they sent me back a brand new one free of charge....

 

That is odd, glad Comp got you fixed back up!

 

2 cars by me went up in flames when the rails lifted

 

What rails? The billet rails or the LS2 OEM rails?

 

fast billet for ls1

 

Fast billet here with a 102 and no issues here. Everything bolted up good and solid.

 

im using stock ls2 fuel rails and im having no problems and no leaks.

 

Ls2 style fast rails and no issues.

 

i used edlebrock and no issue

 

You need a set of full billet Nasty Performance rails.
Short inj
http://www.nastyperformance.com/shop...ck-fuel-rails/
Tall inj
http://www.nastyperformance.com/shop...ck-fuel-rails/

 

I had similar prob with NXL nitrous unit. mounts would loosen up and blow out injector o rings. red locktite is great on those mount bolts. haven't moved til I went and rebuilt motor.

 

Those Nasty rails are works of art.

 

I would have lost my engine if I hadn't had a stand-by when I tried to fire my stroker with the billet rails the first time. It was like a sprinkler system with the fuel spraying from nearly half of the injector tops! I switched to LS2 rails and haven't thought about it.... until now that you mention it, lol.

LS2 fuel rails ftw