xEtherealx

Don't forget, I've got a Super Auto truck intake waiting for you to test it

omc8

iTrader: (7)

Yes please include the Super Auto -183x in the test !

99 Black Bird T/A

iTrader: (4)

The next stage of the flow test is shaping up as the following intakes.

TPiS / LPE 90mm LS6
Super Vic
Super Auto
WS6 Store ported Intake .(not sure which one will be available)
...and may a surprise

Stay tuned over the next couple of weeks...

Darth_V8r

iTrader: (4)

Awesome! You're still at it! Good news ont he engine too. Glad you'll have something road worthy before too long. That car is far too pretty to just sit there

Fishmasterdan

In for super Vic vs lsxrt. I picked up a super Vic to replace my lsxrt. But after putting on the super Vic I am thinking the lsxrt might be better. Lighter and more plenum.

99 Black Bird T/A

iTrader: (4)

In a well matched race engines set up, I've been told by a reputable vendor, in some cases the LSXRT will only be 10 hp off a dedicated Sheet metal intake manifold on a 950-1000 hp engine. However in other combinations that are milder and less race orientated the LSXRT may not excel. So it should be interesting to see what the Super Vic flows

I intend to also test the Super Vic on a set of heads with a "wing" in the intake port that was designed for carburetor applications. If time and budget allow, I will dig my old LSXRT out and test it on the winged heads as well.

Full disclosure - on my 91 RS Camaro with the LS1 stroker and a small cam, a ported LS6 90mm intake was better by 2hp in controlled dyno testing than the LSXRT. With a high revving cam, the LSXRT would make more power. My RS was focused on stock driveability etc.

Fishmasterdan

Thanks for taking time to do this. I shift at 7200 (it actually revs to 7400). Its a high reving nitrous build.

99 Black Bird T/A

iTrader: (4)

The Super Vic arrived waiting on the one ones and will then set up a time to test.

Jenson

iTrader: (32)

sub'd for more results, would love to see an MSD in there too! I may have to hack a 90mm onto my LS6 soon

99 Black Bird T/A

iTrader: (4)

We are going to have our biggest test to date!!!

WS6 Store is sending a Dorman, Doan truck and Fast 102 cathedral intake for testing!!!!

Big thank you to WS6 Store and everyone else helping support the testing!

Yes a MSD would round out the testing. Maybe we can round one up for a test one day. The current six intakes s about my my logistics limit for one round of testing.

I suppose I'm going to have to long on with my desktop and tidy up the tread and put all the results on a spread sheet so it's easy to read

Jenson

iTrader: (32)

You could put all the results in the first post once finalized. WS6 store also sells the MSD intake, hint hint nudge nudge

Darth_V8r

iTrader: (4)

I've got a msd sitting in storage

99 Black Bird T/A

iTrader: (4)

Darth, sending PM

ArcticZ28

iTrader: (14)

In for tracking progress. In sore need of an intake track upgrade.

omc8

iTrader: (7)

This new test will be .......

TPIS/LPE LS6
Super Vic
Super Auto Truck
DLS2 - ported by WS6 store
Dorman Truck - ported by WS6 store
Fast 102


Is this correct ? please lmk

ss4chad

iTrader: (26)

GO VIC GO!!
GO VIC GO!!
GO VIC GO!!

Chad

99 Black Bird T/A

iTrader: (4)

Yes OMC that's the plan

Waiting on a few more intakes to arrive.

Mr. SSinister

iTrader: (2)

In for updates. Thanks to all that have contributed so far! Excited to see how the ported Dorman compares and where the flow increase comes in.

99 Black Bird T/A

iTrader: (4)

Darth 's MSD intake arrived today and I've contacted the shop to set up a testing time.

This test will be

Ported MSD
LPE/TPiS LS6 90mm
Super Vic
The special truck intake

Jenson

iTrader: (32)

Thank you Darth for offering up the MSD!!