Question/Help W/Exhaust Upgrade WITH Center Mount Exhaust
#1
Launching!
Thread Starter
Join Date: Apr 2014
Location: Madison, Alabama
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
Question/Help W/Exhaust Upgrade WITH Center Mount Exhaust
I realize that I'm, more than likely, going to get flamed for this because.... Well, there's countless, I mean Hundreds and Hundreds of Threads on Exhaust.
However, this question is for those that have the Factory 345HP Center Mount Exhaust.
Currently, my SS Camaro has;
Just like everyone else that has come before me, the minute you put LT's on, with the SLP LM1, the Exhaust now sounds horrible. It's extremely Raspy and the Drone inside the car is unbearable.
Here's my Question for EVERYONE that can provide a solution. What Muffler would you recommend, but would also allow me to maintain my CME. That is what is most important to me.
If you're wondering what "sound" I'm going for- I'd like a deeper tone, trying to eliminate the "rasp" and drone you hear in the car.
Thank You for all the input- I truly appreciate it!
Carl
However, this question is for those that have the Factory 345HP Center Mount Exhaust.
Currently, my SS Camaro has;
- Kooks 1 7/8 Long Tube Headers
- Kooks High Flow Race Cat's
- SLP Loudmouth 1 (LM1)
- Factory Center Mount Exhaust
Just like everyone else that has come before me, the minute you put LT's on, with the SLP LM1, the Exhaust now sounds horrible. It's extremely Raspy and the Drone inside the car is unbearable.
Here's my Question for EVERYONE that can provide a solution. What Muffler would you recommend, but would also allow me to maintain my CME. That is what is most important to me.
- Would you simply add a Muffler & keep the SLP Bullet Type Glass Pack?
- Would you get rid of the SLP Bullet Glass Pack and replace it with another Manufacture?
- Would you get rid of the SLP Bullet Glass Pack and install a Muffler and that's it?
If you're wondering what "sound" I'm going for- I'd like a deeper tone, trying to eliminate the "rasp" and drone you hear in the car.
Thank You for all the input- I truly appreciate it!
Carl
#2
Launching!
Join Date: Aug 2011
Location: Kennesaw, GA
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
I would get rid of the SLP LM1 and get a quieter, better sounding bullet that isn't pure noise.
Look at Magnaflow, Moroso Spiral Flows, Borla, etc. All of these will sound tamer and have better tone and eliminate a lot of the drone/rasp.
Look at Magnaflow, Moroso Spiral Flows, Borla, etc. All of these will sound tamer and have better tone and eliminate a lot of the drone/rasp.
#3
Launching!
Thread Starter
Join Date: Apr 2014
Location: Madison, Alabama
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
Do you have any experience with either one? I appreciate your feedback.
#4
Moderator
iTrader: (11)
Join Date: Mar 2002
Location: East Central Florida
Posts: 12,605
Likes: 0
Received 6 Likes
on
6 Posts
I love the way mine sounds with the factory CME muffler,
cam and headers (have had both long tubes and shorties)
and no cats. Sounds hot but gets no po-po hassle, no rasp
etc. But I'm guessing that piece has left the building?
cam and headers (have had both long tubes and shorties)
and no cats. Sounds hot but gets no po-po hassle, no rasp
etc. But I'm guessing that piece has left the building?
#5
Launching!
Thread Starter
Join Date: Apr 2014
Location: Madison, Alabama
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
It didn't sound bad..... Until I added the LT's. Then all bets were off.
#6
Launching!
Thread Starter
Join Date: Apr 2014
Location: Madison, Alabama
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
I'm considering ditching the LM1 for the Magnaflow 14419. How many people have ran that, without any muffler?
I'm convinced it cannot sound as loud and raspy as the LM1..... Ha Ha!!
I'm convinced it cannot sound as loud and raspy as the LM1..... Ha Ha!!
Trending Topics
#9
Launching!
Thread Starter
Join Date: Apr 2014
Location: Madison, Alabama
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
That is a very good question.... When the time comes to wake the dead- I'll simply get out my 1969 RS/SS Camaro.
#11
Launching!
Join Date: Aug 2011
Location: Kennesaw, GA
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
They are among the tamest bullets that have a deep growl, but honestly tone down some of that brutal V8 exhaust note.
If you want in your face exhaust, maybe look at at Borla.
Borla has a very nice sound to it, but is a bit louder and "uncorked".
I have Moroso spiral flows on my full exhaust (LT's, X pipe, cats, true duals) and it is a nice moderate volume with great tone.
Zero drone.
I vote magnaflow for more sanity, Borla for more roar, Moroso for a good middleground.
#12
Launching!
Thread Starter
Join Date: Apr 2014
Location: Madison, Alabama
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
I have heard plenty of cars with Magnaflow bullets.
They are among the tamest bullets that have a deep growl, but honestly tone down some of that brutal V8 exhaust note.
If you want in your face exhaust, maybe look at at Borla.
Borla has a very nice sound to it, but is a bit louder and "uncorked".
I have Moroso spiral flows on my full exhaust (LT's, X pipe, cats, true duals) and it is a nice moderate volume with great tone.
Zero drone.
I vote magnaflow for more sanity, Borla for more roar, Moroso for a good middleground.
They are among the tamest bullets that have a deep growl, but honestly tone down some of that brutal V8 exhaust note.
If you want in your face exhaust, maybe look at at Borla.
Borla has a very nice sound to it, but is a bit louder and "uncorked".
I have Moroso spiral flows on my full exhaust (LT's, X pipe, cats, true duals) and it is a nice moderate volume with great tone.
Zero drone.
I vote magnaflow for more sanity, Borla for more roar, Moroso for a good middleground.
#13
TECH Junkie
iTrader: (11)
Dude that is one slick looking and CLEAN F body!
With that out of the way let me say if I had the LM exhaust already, there is no other option I would think about other than the one below.
http://www.slponline.com/product/310...ml#prettyPhoto
With that out of the way let me say if I had the LM exhaust already, there is no other option I would think about other than the one below.
http://www.slponline.com/product/310...ml#prettyPhoto