Oil filter wrong
Thread Starter
TECH Apprentice
Joined: Jul 2012
Posts: 341
Likes: 12
From: UK
Oil filter wrong Hello,
i have an ls6 block with 241 heads, my oil sump wasnt the original i found out.
Anyway, ordered a HP1007 k&n oil filter and it wont screw on. The filter that came off ADA102112 blueprint one, has a very slightly larger thread around 1mm bigger then the HP1007 filter.
My number on the sump is 12624617 but no date on it.
Any ideas what i should fit or what it should be before i just order a new Blueprint one ADA102112?
Many thanks for any help
regzrds
gav
i have an ls6 block with 241 heads, my oil sump wasnt the original i found out.
Anyway, ordered a HP1007 k&n oil filter and it wont screw on. The filter that came off ADA102112 blueprint one, has a very slightly larger thread around 1mm bigger then the HP1007 filter.
My number on the sump is 12624617 but no date on it.
Any ideas what i should fit or what it should be before i just order a new Blueprint one ADA102112?
Many thanks for any help
regzrds
gav
Yes, it does work.
You put your oil filter number into the Manufacture Part Number column and then it tells you all kinds of things about your oil filter.
Your ADA102112 has a 22x1.5mm thread, the Wix equivalent filter number is 57060.
The K&N HP1007 has 13/16-16 thread, and will not fit your oil pan.
The PF46 also has 13/16-16 thread, and will not fit.
The PF48 has the 22x1.5mm thread you are looking for and is the same size. Hence the Wix filter is also 57060.
This website is very useful, I'd bookmark it and take a closer look at it. It should prevent you from buying the wrong oil filter next time.
You put your oil filter number into the Manufacture Part Number column and then it tells you all kinds of things about your oil filter.Your ADA102112 has a 22x1.5mm thread, the Wix equivalent filter number is 57060.
The K&N HP1007 has 13/16-16 thread, and will not fit your oil pan.
The PF46 also has 13/16-16 thread, and will not fit.
The PF48 has the 22x1.5mm thread you are looking for and is the same size. Hence the Wix filter is also 57060.
This website is very useful, I'd bookmark it and take a closer look at it. It should prevent you from buying the wrong oil filter next time.
Trending Topics
The part number you posted for your oil pan seems to be a replacement oil pan for a 2007 to 2011 Corvette. So if you need one in the future you'll know what car the pan was from to look up a replacement.
Chevrolet Performance Engine Oil Pans 12624617
Chevrolet Performance Engine Oil Pans 12624617
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
LS1Tech Sponsor
Joined: Oct 2009
Posts: 515
Likes: 40
From: Orlando, Florida
Around 2007 GM switched from 13/16" to 22mm filter threads on all LS oil pans. Even if you buy a replacement pan for an older LS powered car, it will come with a 22mm filter thread. So the new filter to look for is the AC Delco PF48 or equivalent. You can basically look for replacement filters for any 2008+ LS powered car (Corvette, Camaro SS, etc) for find compatible filters.
9 Second Club
Joined: Nov 2003
Posts: 13,616
Likes: 185
From: Norn Iron
Measure the male thread sticking out.
US based stuff tends to be 13/16....some old Rover or K-series filters will fit that
Some newer stuff incl Monaro etc will be M20....small Citroen filter would be common.
US based stuff tends to be 13/16....some old Rover or K-series filters will fit that
Some newer stuff incl Monaro etc will be M20....small Citroen filter would be common.
Joined: Aug 2007
Posts: 24,241
Likes: 89
From: Turnin' Wrenches Infractions: 005
Around 2007 GM switched from 13/16" to 22mm filter threads on all LS oil pans. Even if you buy a replacement pan for an older LS powered car, it will come with a 22mm filter thread. So the new filter to look for is the AC Delco PF48 or equivalent. You can basically look for replacement filters for any 2008+ LS powered car (Corvette, Camaro SS, etc) for find compatible filters.
9 Second Club
Joined: Nov 2003
Posts: 13,616
Likes: 185
From: Norn Iron
When I used the old FBody sump, I just changed the 13/16 fitting to M20....
And would ya believe, the female thread in the pan was M20 anyway, they adapted it to suit what would be a more common filter in the US.
Cant comment on later stuff though, it could well be M22.
Easy to measure the male thread to see.
And would ya believe, the female thread in the pan was M20 anyway, they adapted it to suit what would be a more common filter in the US.
Cant comment on later stuff though, it could well be M22.
Easy to measure the male thread to see.
