Jeg's DS loop for duals?
Thread Starter
TECH Fanatic
iTrader: (4)
Joined: Feb 2003
Posts: 1,527
Likes: 0
From: bridgwater, nj
Jeg's DS loop for duals? which DS loop should I get that won't interfere? I did a search and found that one suggested the custom fit but I am really interested in seeing some pictures.
The universal (Jegs or Lakewood)- looks like I wil have to do some bending to fit the stock TA
http://www.jegs.com/cgi-bin/ncommerc...31&prmenbr=361
or
The custom fit welded one (note: picture is of the Mustang one)
http://www.jegs.com/cgi-bin/ncommerc...30&prmenbr=361
I am getting duals in a few weeks and would also like it to be a mounting point for the X pipe. Also, if anyone has pics of these in place I would really appreciate it. Thanks.
The universal (Jegs or Lakewood)- looks like I wil have to do some bending to fit the stock TA
http://www.jegs.com/cgi-bin/ncommerc...31&prmenbr=361
or
The custom fit welded one (note: picture is of the Mustang one)
http://www.jegs.com/cgi-bin/ncommerc...30&prmenbr=361
I am getting duals in a few weeks and would also like it to be a mounting point for the X pipe. Also, if anyone has pics of these in place I would really appreciate it. Thanks.
Last edited by BLASTER; Aug 1, 2004 at 10:09 AM.
Thread Starter
TECH Fanatic
iTrader: (4)
Joined: Feb 2003
Posts: 1,527
Likes: 0
From: bridgwater, nj
Don't you think that I will have to bend the Lakewood around the TA? I just figured the custom fit one would fit pretty good (just have to disconnect the driveshaft to get it on). Anyone have any pics?
I think wilwaxu is talking about the LS1 specific lakewood loop which I have as well. the loop is already out of the torque arm's way and the x-pipe will have to be very close to the floor pan to hit loop.
Thread Starter
TECH Fanatic
iTrader: (4)
Joined: Feb 2003
Posts: 1,527
Likes: 0
From: bridgwater, nj
Originally Posted by taqwache
i just made my own. cost me $10 in steel and bolts right in place without drilling.
I wish I could but I don't know how to weld and can't bend the steel into arcs or else I would make one out of Stainless. Looks good though. Wanna make me one? LOL
We had the Jester loop I believe when I had my 2.5" setup, but now I run a Lakewood with my 3" setup.
Is that the universal for ~30 bucks or the custom fit Lakewood for ~50 bucks. I will be doing a 3" as well. Thanks
Trending Topics
I'll probably modify my BMR somehow once my duals go on...the first Jegs one pictured above sure looks alot like the custom made one mentioned above...I'm curious to see if that would work.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
