loudmouth to qtp ory problem
loudmouth to qtp ory problem I just installed some pacesetter headers this passed weekend and I also bolted a qtp ory to them, all that went on fine but for some reason at the end of the ory its 4 inches wide so they give me this other peice of metal that merges the 3 inch catback pipe to the 4 inch y pipe. this is where the problem is, that merger or connector wont let me push my catback far enough. DO I cut maybe 3 inches off of the catback pipe to pushit back further? You know how the loudmouth has that bend where it goes over the axle right, well right now its hitting the axle and I can't bolt it to the clamp it has on that side.
what do I do?
what do I do?
Staging Lane
Joined: Jul 2004
Posts: 50
Likes: 0
santiago,
i will be receiving my new revised pace setter lt's and my qtp catted y-pipe next week. i'm also running the loudmouth exhaust. let me know how it sounds when you are finished.
how was the install?
any fitment issues?
how well does the qtp piece fit (to the headers & under the car), did you have any problems aside from what you mentioned?
my only concern is the qtp y-pipe and how its going to fit. qtp told me it will work with the pace setter lt's.
dan
i will be receiving my new revised pace setter lt's and my qtp catted y-pipe next week. i'm also running the loudmouth exhaust. let me know how it sounds when you are finished.
how was the install?
any fitment issues?
how well does the qtp piece fit (to the headers & under the car), did you have any problems aside from what you mentioned?
my only concern is the qtp y-pipe and how its going to fit. qtp told me it will work with the pace setter lt's.
dan
Trending Topics
Originally Posted by speednine
santiago,
i will be receiving my new revised pace setter lt's and my qtp catted y-pipe next week. i'm also running the loudmouth exhaust. let me know how it sounds when you are finished.
how was the install?
any fitment issues?
how well does the qtp piece fit (to the headers & under the car), did you have any problems aside from what you mentioned?
my only concern is the qtp y-pipe and how its going to fit. qtp told me it will work with the pace setter lt's.
dan
i will be receiving my new revised pace setter lt's and my qtp catted y-pipe next week. i'm also running the loudmouth exhaust. let me know how it sounds when you are finished.
how was the install?
any fitment issues?
how well does the qtp piece fit (to the headers & under the car), did you have any problems aside from what you mentioned?
my only concern is the qtp y-pipe and how its going to fit. qtp told me it will work with the pace setter lt's.
dan
When I finished installing my headers smoke came out from under there for a few min, but then it went away.
good luck
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
