Just like the title says... I have a H/C/N setup with Hooker LTs, no cats, and a DynoMax bullet where the SLP LM "resonator" was. It sounds great at WOT and idle, but everywhere else doesn't do it for me... Any ideas?

 

Maybe chambered.

 

Nobody else using the XR-1 or something similar?

 

Gmmg

 

I say give the Moroso Spiral Flow a shot. Similar to a Flo Pro Twister but easier to get ahold of. 46 bucks and sounds like a beast!

 

Where would I find one of those Spiral Flows? Thanks! Ben

 

Both Summit and Jegs carry them. They're in the muffler section under the brand name "Moroso"! Good luck buddy

 

Hmmm. I have both the Summit and Jeg's catalogs right here...no "Spiral Flow" or "Moroso". There is a nice looking Dynatech muffler that seems to be a XR-1 clone for $40 less...anybody use one? Thanks for the help! Ben

 

get the Borla XR1 #40085 to quiet things down a bit.

 

That's a 15 inch, correct? Would the 16 inch be better? Thanks for all the help!

 

Bump...

 

that's correct. it's 15 in long, 5 in wide, and I/O is 3 in.

 

http://www.javagator.com/z28/images/borlaslp/

that's a good link for ya.

 

We have the Borla XR-1 Mufflers on sale right now!

The 40085 is located here: http://www.eadperformance.com/catalo...roducts_id=311
We should have them back in stock within a week!

The rest of the XR-1 mufflers on sale can be found here: http://www.eadperformance.com/catalo...Path=41_74_113

 

Thats an awesome deal on those mufflers!

 

That is a good deal! Will the XR-1 quiet my ride down noticeably over the 12-inch DynoMax bullet, and more importantly, cut down the rasp? Thanks for all your guys help and I will prolly get the XR-1 anyway. Ben

 

Any other opinions before I pull the trigger on the XR-1? Thanks!

 

The XR-1 will make a noticeable difference in loudness and tone over the 12 inch bullet. The XR-1 will be quieter and a bit deeper in tone since it has quite a bit more packing in it compared to the bullet. They both cut down on the rasp quite a bit, but the XR-1 should cut it down a bit better.

 

Actually, the DynoMax bullet I currently have does squat for rasp. That's the main reason it's going in the garbage. I'm hoping the XR-1 will be enough...I'll sacrifice a couple HP for a decent sound. Thanks Tim!

 

With the loudmouth, the XR-1 will be much better.
Unfortunately, with just the bullet and no real muffler (like the loudmouth setup), you still get quite a bit of rasp. The XR-1 sounds a ton better in the LM setup then a bullet, and there should be no noticeable HP loss from switching mufflers. Both of them are straight through.