Whats the Best Bang for the buck?????
#22
TECH Fanatic
iTrader: (1)
Join Date: May 2003
Location: Leominster, MA
Posts: 1,647
Likes: 0
Received 0 Likes
on
0 Posts
Not many choices in the 1500rpm and up range. If you move to 2500RPM and up range there are lots of choices. Best bet is to have one custom ground. You can tell the RIGHT cam guy what you want and usually get the best results.
#23
11 Second Club
Join Date: May 2004
Location: Va. beach,Va
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
ttt I didnot gain alot from kooks headers(1/10) and that is tuned. But a very mild cam(in sig,) gave me 3/10s off in the 1/4. And I should have chosen better. So I'd have to say cam,cat back(was good for a tenth) and or gears.
Originally Posted by Maxmumboom
I have a set of bfg drag radials on a set of stock c5 wheels , I still havent used them yet. Im trying to be rational about modding this car (Is that possible?). I really dont drag race the car. I do end up doing alot of light to light racing though. The guy who had the car before me had run a best of 12.6 with the drag radials, and the current set up. Some say gears, others say heads/cam/tuning/headers. Im still doing my reasearch. Maybe gears and a cam/headers would be a good start. when i go with the cam, will the Kooks or qtp's make a huge difference, or is it like a 5 or 10 hp gain? some say they have gained 30 hp with the headers, others claim 5 hp on the site? Whats the truth behind that?
ttt now
I didnot gain alot from kooks headers(1/10) and that is tuned. But a very mild cam(in sig,) gave me 3/10s off in the 1/4. And I should have chosen better. So I'd have to say cam,cat back(was good for a tenth) and or gears.
Thanks,
J
ttt now
I didnot gain alot from kooks headers(1/10) and that is tuned. But a very mild cam(in sig,) gave me 3/10s off in the 1/4. And I should have chosen better. So I'd have to say cam,cat back(was good for a tenth) and or gears.
Thanks,
J
#24
Banned
iTrader: (92)
Join Date: Sep 2004
Location: Atlanta
Posts: 7,757
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Maxmumboom
How should I go about selecting the cam? Im looking to make the most hp/tq from 1500rpm and up.