True Dual Pic
Yep! Looks pretty good to me. They best I've seen is those pics on exhaustsounds.com with the coke can completely under the pipes, and the worst I've seen is where the can wont even roll under the pipe on its side 
I'd say yours are perfect.
I'd say yours are perfect.
Originally Posted by 01TAFlyer
Thought I would post this pic of my tsp duals to see how my clearence compared to others. This is a stock ride height btw.
So how did I do?
So how did I do?
Jason
Trending Topics
Originally Posted by Camaro99SS
You might want to flip those rear hangers sideways like you did up front to get a little more clearance. 
Jason
Jason
gotta do that when its nice out.
and especially when i lower it.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
This is the TSP true duals, 3in all the way. I have jet-hot longtubes. Camaro99ss what do you mean by flipping the hangers sideways? His hangers are the way mine are. Also, I haven't had any banging with the way it is currently positioned. I set these up in my garage on my back, with the car about a foot off the ground. So I guess I did alright. Thanks for all the comments guys! 
Originally Posted by 01TAFlyer
Camaro99ss what do you mean by flipping the hangers sideways? His hangers are the way mine are.
Jason
Originally Posted by Camaro99SS
The rear hangers are pointed vertically so that the lowlest point on the whole exhaust are the bolts. If you flip those hangers sideways, you'll gain some clearance.
