Mti Coupler
Thread Starter
Teching In
Joined: Jan 2005
Posts: 26
Likes: 0
Mti Coupler HAVE ANY OF U GUYS HAD PROBLEM WITH THE COUPLER FROM MTI BY IT BEING TO LONG. I HAD TO TRIM MINES 1/2 INCH FROM THE TROTTLE BODY SIDE IN ORDER TO MAKE IT FIT. ARE THEY SUPPOSE TO COME THAT WAY. 
TECH Regular
Joined: Jun 2002
Posts: 450
Likes: 0
From: Pasadena Tx
should have bought the FERNCO......$6 at home depot
TECH Senior Member
iTrader: (10)
Joined: Nov 2001
Posts: 8,766
Likes: 0
From: Gainesville, Denton TX
The fernco and my MTI lid did not like each other.... Kept poping the passenger side of the lid out. I think the ones with the little hump would do better as it leaves a little room for flex.
Trending Topics
fernco 3" coupler... in the PVC plumbing section... rubber....
I have had no issues with it on anybodys lid so far....
heat it in a microwave and use some gloves to handle it to get a little more flexibility...once you get it on...tightend down the clamps....the rubber will hold its stretch and shape after that....so it wont pull on anything...
and yes...$6
I have had no issues with it on anybodys lid so far....
heat it in a microwave and use some gloves to handle it to get a little more flexibility...once you get it on...tightend down the clamps....the rubber will hold its stretch and shape after that....so it wont pull on anything...
and yes...$6
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo TECH Senior Member
iTrader: (10)
Joined: Nov 2001
Posts: 8,766
Likes: 0
From: Gainesville, Denton TX
guess i should have tried that, i cut and cut and bitched and bitched some more and finally said the hell with it. I had a link of a company that had the 'hump' hose like everyone is buyin for like 15 bucks.. Baker hose is up to 30 bucks now and it doesnt have the hump..
Might just find a truck stop and get something there... who knows..
Might just find a truck stop and get something there... who knows..
TECH Regular
Joined: Feb 2002
Posts: 444
Likes: 0
From: Tomball
The Fernco and WS6 cars do not go together...I tried to install one on mine, but since the WS6 has the raised air lid it doesnt want to stay on so I threw it away and put the stock one on...I know you have to trim the inner lip on the throttle body side of it and the people that I know that use them put them in the microwave to make them stretch some and makes them fit better supposedly....
