Please Help!!!
Please Help!!! I was taking my stock manifold to install the FAST manifold and when i pulled it the stock one one of the fuel injector harness ripped. the wire I mean and also the burst panel wire ripped too. I'm going to put everything back and get it towed maybe. also there is a vacuum hole in the back of the manifold and I don't know how it goes, I need help
What do you mean, ripped?
If you tore the insulation, electrical tape or heat shrink
tubing will cover it up. If you broke the conductor(s)
then solder in a little extra piece and then heat shrink.
"Burst panel wire", maybe is the MAP sensor? And the hole
is where it used to be?
If you tore the insulation, electrical tape or heat shrink
tubing will cover it up. If you broke the conductor(s)
then solder in a little extra piece and then heat shrink.
"Burst panel wire", maybe is the MAP sensor? And the hole
is where it used to be?
Originally Posted by jimmyblue
What do you mean, ripped?
If you tore the insulation, electrical tape or heat shrink
tubing will cover it up. If you broke the conductor(s)
then solder in a little extra piece and then heat shrink.
"Burst panel wire", maybe is the MAP sensor? And the hole
is where it used to be?
If you tore the insulation, electrical tape or heat shrink
tubing will cover it up. If you broke the conductor(s)
then solder in a little extra piece and then heat shrink.
"Burst panel wire", maybe is the MAP sensor? And the hole
is where it used to be?
Well the fuel injector clip, the one that you push up to take it off the injector, well that thing was ripped off the injector itslf. now on the manifold floor if you want to call it the block ceiling there are two hole and wires coming from both of them well the further back is ripped too
Those sound like the knock sensor wires!! Are the connectors pulled off of the wires?? Do as JimmyBlue says above....if unable to fix then replace that part of the harness(last resort).
Originally Posted by SS1875
Those sound like the knock sensor wires!! Are the connectors pulled off of the wires?? Do as JimmyBlue says above....if unable to fix then replace that part of the harness(last resort).
I'm just going to put back everything that I can and take it to the dealer. I am discouraged now,
because I broke two things 
and I am clueless about 
what to do. I was going to do my headers next week but I'll let a pro do it now. Oh well. Like they say cheap things come out expensive in the end. 
Trending Topics
No, just fix it yourself! Wires are nothing to be afraid of, and a dealer is going to screw you over sooooooooooo bad. Fixing something is 70% confidence, 30% skill. That's what I always heard, and I think it's true. It dosen't sound like you realy messed anything up too bad anyway. Besides, the Titanic was built by professionals while the Ark was built by amateurs.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo I agree, dont give up yet!! Maybe take some pictures if you can of what is broken and we will try and help you out!!! We all have done something wrong the first time and had to fix it...you can to!!
Originally Posted by USMARINE1108
No, just fix it yourself! Wires are nothing to be afraid of, and a dealer is going to screw you over sooooooooooo bad. Fixing something is 70% confidence, 30% skill. That's what I always heard, and I think it's true. It dosen't sound like you realy messed anything up too bad anyway. Besides, the Titanic was built by professionals while the Ark was built by amateurs.
wow that last sentence really made me want to get up take over the world now, you made me feel like I can't do anything now
Originally Posted by SS1875
I agree, dont give up yet!! Maybe take some pictures if you can of what is broken and we will try and help you out!!! We all have done something wrong the first time and had to fix it...you can to!!
Ya I'll get pix and post them