Chambered muffler like sweet thunder, but 3" ID
#23
Staging Lane
Join Date: Jul 2005
Location: New Jersey
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Does anyone know what the difference in sound will be between the 16" and the larger ones? Also, what size muffler was on the sound clip? Also what exhaust setup was that?
#24
Teching In
iTrader: (2)
Join Date: Jan 2002
Location: Laguna Hills, CA
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
The muffler in my and RichZ's cars is PN: 3020SB. 16" body/21" overall. FWIW, it took up just about my whole I-pipe so I'm not sure how much bigger you can go. You could probably get the 20" blank muffler in there since you already have a the LM 3" I-pipe if you wanted. (PN: 3030BL) I would take some measurments first just to make sure though. I would assume the larger the muffler, the less loud the exhaust would be. Don't know if it will change the tone or not. Wanna try it out and let us know?
As for the exhaust setup, it was stock manifolds/exhaust, with the exception of a Powerstick in the I-pipe and a Zed-style cut out. (located BEHIND the axle, not in the I-pipe)
As for the exhaust setup, it was stock manifolds/exhaust, with the exception of a Powerstick in the I-pipe and a Zed-style cut out. (located BEHIND the axle, not in the I-pipe)
#25
TECH Fanatic
iTrader: (1)
Join Date: Apr 2005
Location: ATX
Posts: 1,625
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by JBrd400
The muffler in my and RichZ's cars is PN: 3020SB. 16" body/21" overall. FWIW, it took up just about my whole I-pipe so I'm not sure how much bigger you can go. You could probably get the 20" blank muffler in there since you already have a the LM 3" I-pipe if you wanted. (PN: 3030BL) I would take some measurments first just to make sure though. I would assume the larger the muffler, the less loud the exhaust would be. Don't know if it will change the tone or not. Wanna try it out and let us know?
As for the exhaust setup, it was stock manifolds/exhaust, with the exception of a Powerstick in the I-pipe and a Zed-style cut out. (located BEHIND the axle, not in the I-pipe)
As for the exhaust setup, it was stock manifolds/exhaust, with the exception of a Powerstick in the I-pipe and a Zed-style cut out. (located BEHIND the axle, not in the I-pipe)
#26
Teching In
iTrader: (2)
Join Date: Jan 2002
Location: Laguna Hills, CA
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
there's a clip in page 1 of this thread...
Admittedly it's not the best, but you'll get the idea. I'll see if we can get more though. Rich and I are supposed to meet up today for a cruise so MAYBE we can get a somethin' for you guys...
Edit: I forgot, I had a 2nd clip of the exhaust as well. Unfortunately there's a lot of background noise, but here it is anyway...
http://s95410392.onlinehome.us/JBrd4...ovies/vid1.mpg
Admittedly it's not the best, but you'll get the idea. I'll see if we can get more though. Rich and I are supposed to meet up today for a cruise so MAYBE we can get a somethin' for you guys...
Edit: I forgot, I had a 2nd clip of the exhaust as well. Unfortunately there's a lot of background noise, but here it is anyway...
http://s95410392.onlinehome.us/JBrd4...ovies/vid1.mpg
Last edited by JBrd400; 08-14-2005 at 02:29 PM.
#27
MASS seller approved
iTrader: (49)
We've been talking to Classic Chambered and we should be an authorized dealer in the next few days. Although, at the moment, their machines are down and there is no stock of the 3" mufflers anywhere. They hope to be back up and running in the next week or two.
I will post up more info as soon as we have it.
I will post up more info as soon as we have it.
Last edited by Tim @ EADPerformance; 08-14-2005 at 03:58 PM.
#29
TECH Fanatic
iTrader: (1)
Join Date: Apr 2005
Location: ATX
Posts: 1,625
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Tim @ EADPerformance
We've been talking to Classic Chambered and we should be an authorized dealer in the next few days. Although, at the moment, they're machines are down and there is no stock of the 3" mufflers anywhere. They hope to be back up and running in the next week or two.
I will post up more info as soon as we have it.
I will post up more info as soon as we have it.
#30
Teching In
iTrader: (2)
Join Date: Jan 2002
Location: Laguna Hills, CA
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
ok guys... I met up with RichZ today and got to hear his exhaust. (has stock exhaust with a Powerstick in the I-pipe and no rear muffler) I can honestly say that I like the sound of his, better than my own. My exhaust sounds somewhat muffled, whereas his is more crisp. Kinda hard to explain, but I like his a lot.
For those that are curious, I got a vid of Rich's exhaust as well. Since it's Rich's car, I'll let him post it up. I would expect you guys will have it in the next day or two. Just FYI.
For those that are curious, I got a vid of Rich's exhaust as well. Since it's Rich's car, I'll let him post it up. I would expect you guys will have it in the next day or two. Just FYI.
#33
King of Pigskin Knowledge
iTrader: (7)
Join Date: Dec 2002
Location: Ohio
Posts: 602
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Tim @ EADPerformance
Soon as I can get my hands on a pair, I'll be fabbing up a set of true duals for my car to replace my GMMG
https://ls1tech.com/forums/generation-iii-external-engine/357765-anybody-running-30-sweet-thunders-w-true-duals.html
#34
Staging Lane
Join Date: Jul 2005
Location: New Jersey
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
just ordered them, the only place in the country that seems to have some in stock is Bill & Eds (haha) in California. the guy who makes them supposidly has been unable to make them since last december. Production is suppose to resume in a month.
lame.
I'll post clips next week on a LM setup... oooo God i hope its loud!
lame.
I'll post clips next week on a LM setup... oooo God i hope its loud!
#35
MASS seller approved
iTrader: (49)
Originally Posted by BuckeyeROC
Tim, is there anyway you guys could make/sell a TD setup like the pic in the thread below? There are ALOT of people looking for somewhat quiet and deep sounding TD's. Don't know what they sound like w/ 2 chambered muffs on each pipe, but hopefully it'd quiet it down...
https://ls1tech.com/forums/showthread.php?t=357765
https://ls1tech.com/forums/showthread.php?t=357765
#36
11 Second Club
Originally Posted by 2K WS6
lame.
I'll post clips next week on a LM setup... oooo God i hope its loud!
I'll post clips next week on a LM setup... oooo God i hope its loud!
#37
King of Pigskin Knowledge
iTrader: (7)
Join Date: Dec 2002
Location: Ohio
Posts: 602
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Tim @ EADPerformance
I'm actually planning on doing something very similiar to that setup. Depending on how well the fabrication goes, I was planning on making some sort of system available, but I gotta wait and see until I have pipe & mufflers available.
#40
TECH Junkie
iTrader: (100)
Originally Posted by BuckeyeROC
Tim, is there anyway you guys could make/sell a TD setup like the pic in the thread below? There are ALOT of people looking for somewhat quiet and deep sounding TD's. Don't know what they sound like w/ 2 chambered muffs on each pipe, but hopefully it'd quiet it down...
https://ls1tech.com/forums/showthread.php?t=357765
https://ls1tech.com/forums/showthread.php?t=357765
David