Flowmaster alternative, something just as loud?
Flowmaster alternative, something just as loud? I have read all the threads that the flowmaster will make you loose 10-15rwhp compared to other catbacks. I am used and like how loud it is. I do have a cut-out on it, but still want to replace the muffler with something just as loud, but will free up that horsepower. I know that most people on here will reccomend the hooker or magnaflow, but most consider those a mellow/quieter muffler. Any other alternatives? Will the flowmaster 40 series flow much better than the 80 series that came with the catback? thanks
Have you listened to all of the sound clips at the top of the page? It's really a matter of taste. Question is: what's more important... hp or loudness. By the looks of your mods, I'd say hp. If you have an electric cutout, I'd say just keep the flowmaster (since you like the sound) and open her up when you need to.
I have a QTP on it, just have to run the wire and switch for it. After reading a lot of threads, it seems like the magnaflow or hooker would be nice. From what I got, the hooker is quieter but deeper, and the magnaflow is louder but will rasp more when you add long tubes and take of the cats.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by Jimmy P
Anyone know what size muffler comes with the flowmaster? I will probably just have the flowmaster cut off and weld on a magnalfow or hooker. Anyone? thanks
Just measure it with a tape measure.
After looking at pictures of the hooker and magnaflow mufflers, I realized that I cant just get a muffler and drop it in. The flowmaster has chambers, while the hooker and magnaflow are straight through. That means I would need to have new pipes bent to route the piping for one of the exaust tips. I will just get a hooker cat back and replace the tips with my flowmaster ones.
10, 40, alternative, alternatives, cheap, cheaper, cut, exhaust, flowmaster, flowmasters, loud, louder, magnaflow, open, series
